References
Maslenkov, S.B., Zharoprochnye stali i splavov: Spravochnik (High-Temperature Steel and Alloys: A Handbook), Moscow: Metallurgiya, 1988.
Belov, A.F., Stroenie i svoistva aviatsionnykh materialov (Structure and Properties of Aviation Materials), Moscow: Metallurgiya, 1988.
Arzamasov, B.N., Konstruktsionnye materials (Structural Materials), Moscow: Mashinostroenie, 1989.
Superalloys II, Sims, C.T., Stoloff, N.S., and Hagel, W.C., Eds., Wiley: New York, 1987, vol. 2.
Superalloys II, Sims, C.T., Stoloff, N.S., and Hagel, W.C., Eds., Wiley: New York, 1987, vol. 1.
Makarov, A.D., Optimizatsiya protsessov rezaniya (Optimization of Cutting Processes), Moscow: Mashinostroenie, 1976.
Vereshchaka, A.S. and Kushner, V.S., Rezanie materialov (Cutting Processes), Moscow: Vysshaya Shkola, 2009.
Poduraev, V.N., Rezanie trudnoobrabatyvaemykh materialov (Cutting Hard Materials), Moscow: Vysshaya Shkola, 1974.
Bobrov, V.F., Osnovy teorii rezaniya metallov (Fundamentals of Metal-Cutting Theory), Moscow: Mashinostroenie, 1975.
Adaskin, A.M., Kashirtsev, V.V., and Sapronov, I.Yu., Creep and failure of steel and alloys with no polymorphic transformation, Vestn. MGTU Stankin, 2011, no. 3, pp. 14–20.
Akabori, T., Physics and Mechanics of the Failure of Solids (Russian translation), Moscow: Metallurgiya, 1971.
Adaskin, A.M., Kremnev, L.S., and Sapronov, I.Yu., Failure of ledeburite and transeutectoidal high-speed steel, Mekhan. Term. Obrab. Met., 2011, no. 6, pp. 23–28.
Fel’dshtein, E.I., Obrabatyvaemost’ stalei (Ease of Working of Steels), Moscow: Mashgiz, 1953.
Lopadze, T.M., Prochnost’ i iznosostoikost’ rezhushchego instrumenta (Strength and Wear Resistance of Cutting Tools), Moscow: Mashinostroenie, 1982.
Zefirov, N.S., Khimicheskaya entsiklopediya (Chemical Encyclopedia), Moscow: Bol’shaya Rossiiskaya Entsiklopediya, 1999, vol. 5.
Znunyants, I.L., Khimicheskaya entsiklopediya (Chemical Encyclopedia), Moscow: Bol’shaya Rossiiskaya Entsiklopediya, 1999, vol. 3.
Zinov’ev, V.E., Teplofizicheskie svoistva metallov pri vysokikh temperaturakh (Thermophysical Properties of Metals at High Temperatures), Moscow: Metallurgiya, 1989.
Author information
Authors and Affiliations
Additional information
Original Russian Text © A.M. Adaskin, V.N. Butrim, A.S. Vereshchaka, V.V. Kashirtsev, A.K. Kirillov, 2013, published in STIN, 2013, No. 7, pp. 36–40.
About this article
Cite this article
Adaskin, A.M., Butrim, V.N., Vereshchaka, A.S. et al. Ease of cutting of high-temperature Kh65NVFT high-chromium alloy. Russ. Engin. Res. 34, 122–125 (2014). https://doi.org/10.3103/S1068798X14020038
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X14020038