Abstract
The stress concentration in a plane crank with a filled hole is considered, in the case of transverse flexure. The stress-concentration coefficient is expressed as a function of the tightness (gap), bending torque, transverse force, and relative width of the plate.
Similar content being viewed by others
References
Sukharev, I.P., Prochnost’ sharnirnykh uzlov mashin (Strength of Machine Hinges), Moscow: Mashinostroenie, 1977.
Semenov-Ezhov, I.E., Stress concentrations in tight joints, Spravochnik. Inzh. Zh., 2000, no. 4, pp. 21–24.
Peterson, R.E., Stress-Concentration Factors, New York: Wiley, 1974.
Semenov-Ezhov, I.E., Stepanov, I.A., and Sukharev, I.P., Stress-strain state of the hub of a two-arm crank, Izv. Vyssh. Uchebn. Zaved., Mashinostr., 1990, no. 3, pp. 26–31.
Bulanov, V.B., Semenov-Ezhov, I.E., and Shirshov, A.A., Flexure of a crank with a filled hole, Izv. Vyssh. Uchebn. Zaved., Mashinostr., 2012, no. 6, pp. 25–29.
Semenov-Ezhov, I.E., Bulanov, V.B., and Shirshov, A.A., Using stress-concentration factors in calculations of the static and fatigue strength, Izv. Vyssh. Uchebn. Zaved., Mashinostr., 2003, no. 8, pp. 3–8.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.B. Bulanov, I.E. Semenov-Ezhov, A.A. Shirshov, 2013, published in Vestnik Mashinostroeniya, 2013, No. 9, pp. 18–21.
About this article
Cite this article
Bulanov, V.B., Semenov-Ezhov, I.E. & Shirshov, A.A. Stress concentration in symmetric two-arm crank with transverse flexure. Russ. Engin. Res. 33, 683–686 (2013). https://doi.org/10.3103/S1068798X13120058
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X13120058