To show wisdom in foreign affairs is much easier than in their own. François de La Rochefoucauld Never point at someone else’s mistakes if itself can not fix them. George Bernard Shaw
Abstract
The fundamental differences between the solution of plastic-deformation problems on the basis of applied plasticity theory and the theory of the pressure treatment of metals are identified.
Similar content being viewed by others
References
Vorontsov, A.L., Theoretical aspects of technological mechanics. 4. The plasticity condition, strengthening, and the stress-strain relationship, Russ. Eng. Res., 2013, vol. 33, no. 7, pp. 400–407.
Hill, R., Mathematical Theory of Plasticity, Oxford: Clarendon Press, 1950.
Johnson, W. and Mellor, P.B., Engineering Plasticity, London: Van Nostrand, 1973.
Il’yushin, A.A., Plastichnost’ (Plasticity), Moscow-Leningrad: GITTL, 1948.
Kachanov, L.M., Osnovy teorii plastichnosti (Fundamentals of Plasticity Theory), Moscow: Nauka, 1969.
Storozhev, M.V. and Popov, E.A., Teoriya obrabotka metallov davleniem (Theory of the Pressure Treatment of Metals), Moscow: Mashinostroenie, 1977.
Stepin, P.A., Soprotivlenie materialov (Strength of Materials), Moscow: Vysshaya Shkola, 1979.
Shevchenko, K.N., Osnovy matematicheskikh metodov v teorii obrabotki metallov davleniem (Fundamentals of Mathematical Methods in the Theory of the Pressure Treatment of Metals), Moscow: Vysshaya Shkola, 1970.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.L. Vorontsov, 2013, published in Vestnik Mashinostroeniya, 2013, No. 7, pp. 64–69.
Earlier articles in this series appeared in Russian Engineering Research, 2013, nos. 4–9. The next will be published in Russian Engineering Research, 2013, no. 11.
About this article
Cite this article
Vorontsov, A.L. Theoretical aspects of technological mechanics. 6. Comparing plasticity theory with the theory of the pressure treatment of metals. Part 1. Russ. Engin. Res. 33, 575–579 (2013). https://doi.org/10.3103/S1068798X1310016X
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X1310016X