References
Abramov, F.N., Influence of the shape and positional error of the basic surfaces on the basing error of prismatic blanks when combining bases, Vestn. Mashinostr., 2007, no. 7, pp. 54–64.
Abramov, F.N., Basing precision for blanks with holes on cylindrical and truncated pins, Russ. Eng. Res., 2010, vol. 30, no. 1, pp. 45–50.
Abramov, F.N., Influence of the mismatch of bases and the shape and position errors of base surfaces on the basing precision for prismatic blanks, Vestn. Mashinostr., 2007, no. 10, pp. 58–65.
Abramov, F.N., Basing precision of disk and bush blanks in multipoint machining, Stanki Instrum., 2009, no. 10, pp. 34–36; no. 11, pp. 24–29.
Abramov, F.N., Basing precision of cylindrical blanks on prisms, Mashinostroitel’ 2010, no. 6, pp. 22–28.
Abramov, F.N., Influence of basing errors on the precision of the executed dimensions in the basing of cylindrical blanks by two pins on two narrow prisms, Mashinostroitel’ 2011, no. 3, pp. 36–47.
Bol’shev, L.N. and Smirnov, N.V., Tablitsy matematicheskoi statistiki (Statistical Tables), Moscow: Nauka, 1983.
Author information
Authors and Affiliations
Additional information
Original Russian Text © F.N. Abramov, 2013, published in STIN, 2013, No. 2, pp. 14–19.
About this article
Cite this article
Abramov, F.N. Errors in basing a cylindrical blank by a single pin on a broad prism. Russ. Engin. Res. 33, 536–541 (2013). https://doi.org/10.3103/S1068798X13090037
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X13090037