Abstract
The wear of nitride ceramic inserts in machining gray cast iron castings is considered. A model of this process is formulated and, on that basis, recommendations are made for improving the inserts.
Similar content being viewed by others
References
Grigoriev, S.N. and Kuzin, V.V., Prospects for tools with ceramic cutting plates in modern metal working, Glass and Ceramics, 2011, vol. 68, (1) nos. 7–8, pp. 253–257.
Kuzin, V.V., Anikin, V.N., Fedorov, S.Yu. and Fedorov, M.Yu., Wear and failure of ceramic cutting plates, Russ. Eng. Res., 2010, vol. 30, no. 11, pp. 1116–1123.
Kuzin, V.V., Dos’ko, S.I., Popov, V.F., Fedorov, S.Yu. and Fedorov, M.Yu., Tooling for high-speed cutting, Russ. Eng. Res., 2005, vol. 25, no. 9, pp. 20–25.
Kuzin, V.V., Effectiveness of the nitride ceramic cutting tools in machining the gray irons, Rus. Eng. Res. 2004, vol. 24, no. 5, pp. 21–27.
Volosova, M.A. and Kuzin, V.V., Regular features of wear of cutting plates from oxide and nitride ceramics, Met. Sci. Heat Treat., 2012, vol. 54, nos. 1–2, pp. 41–46.
Kuzin, V.V., Fedorov, S.Yu., and Fedorov, M.Yu., Contact Processes in Cutting by Ceramic Tools, Vestn. MGTU Stankin, 2010, no. 4, pp. 85–94.
Kuzin, V.V., Thermal state of ceramic cutting tools in high-speed cutting, Russ. Eng. Res., 2004, vol. 24, no. 9, pp. 32–40.
Kuzin, V.V., Effective use of high density ceramic for manufacture of cutting and working tools, Refractories and Industrial Ceramics, 2010, vol. 51, no. 6, pp. 421–426.
Grigor’ev, S.N., Kuzin, V.V., Burton, D. and Batako, A.D., Influence of thermal loads on the stress-strain state of aluminum-oxide ceramic cutting plates, Russ. Eng. Res., 2012, vol. 32, no. 5, pp. 473–477.
Grigor’ev, S.N., Kuzin, V.V., Morgan M.N. and Batako A.D., Influence of loads on the stress-strain state of aluminum-oxide ceramic cutting plates, Russ. Eng. Res., 2012, vol. 32, no. 1, pp. 61–67.
Grigor’ev, S.N., Kuzin, V.V., Burton, D. and Batako, A.D., Influence of ceramic properties on the stress-strain state of a plate in steady heat conduction, Russ. Eng. Res., 2012, vol. 32, no. 4, pp. 374–379.
Kuzin, V.V., Microstructural model of ceramic cutting plate, Russ. Eng. Res., 2011, vol. 31, no. 5, pp. 479–483.
Panasyuk, V.V., Andreikin, A.E., and Kharin, V.S., Nucleation and Growth of Microcracks Generated by Blocked Aggregations of Dislocations, Kiz. Khim. Mekh. Met., 1985, no. 2, pp. 5–16.
Ekobori, T., Scientific Principles of the Strength and Failure of Materials (Russian translation), Kiev: Naukova Dumka, 1978.
Chekina, O.G., Simulation of the Surface Failure in the Contact of Rough Bodies, 9-ya konf. po prochnosti i plastichnosti (Ninth Conference on Strength and Plasticity), Moscow, 1996, vol. 1, pp. 186–191.
Murakami, S., Mechanical Modeling of Material Damage, J. Appl. Mech., 1988, vol. 55, no. 2, pp. 280–286.
Kuzin, V.V., Methodological approach to improving the performance of ceramic tools, Vestn. Mashinostr., 2006, no. 9, pp. 87–88.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.V. Kuzin, S.N. Grigor’ev, S.Yu. Fedorov, 2013, published in Vestnik Mashinostroeniya, 2013, No. 3, pp. 58–62.
About this article
Cite this article
Kuzin, V.V., Grigor’ev, S.N. & Fedorov, S.Y. Wear of nitride ceramic inserts in machining gray cast iron castings. Russ. Engin. Res. 33, 343–347 (2013). https://doi.org/10.3103/S1068798X13060105
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X13060105