Abstract
The cutting of channels in quenched-steel components is considered. A relation is established between the cutting parameters and the operational characteristics of tools with ceramic cutting plates.
Similar content being viewed by others
References
Grigor’ev, S.N. and Kuzin, V.V., Prospects for Tools with Ceramic Cutting Plates in Metal Working, Glass and Ceramics, 2011, vol. 68, 1, no. 7–8, pp. 253–257.
Kuzin, V.V., Effectiveness of the Nitride Ceramic Cutting Tools in Machining the Gray Irons, Russian Engineering Research, 2004, vol. 24, no. 5, pp. 21–27.
Kuzin, V.V., High-Speed Cutting of Molybdenum Alloys, Vestn. Mashinostr., 2004, no. 8, pp. 39–44.
Volosova, M.A. and Grigor’ev, S.N., Ceramic Cutting Plates: The Influence of Abrasive Machining and Coatings on Their Performance, Vestn. MGTU Stankin, 2011, no. 2, pp. 68–74.
Volosova, M.A., Vacuum-Plasma Technology: Producing Nanostructural Coatings for Frictional and Tool Use, Vestn. MGTU Stankin, 2010, no. 4, pp. 66–73.
Vereshchaka, A.S. and Vereshchaka, A.A., Functional Coatings for Cutting Tools, Uprochn. Tekhnol. Pokryt., 2010, no. 6, pp. 28–37.
Volosova, M.A. and Kuzin, V.V., Regular Features of Wear of Cutting Plates from Oxide and Nitride Ceramics, Metal Science and Heat Treatment, 2012, vol. 54, nos. 1–2, pp. 41–46.
Kuzin, V.V., Fedorov, S.Yu., and Fedorov, M.Yu., Contact Processes in Cutting by Ceramic Tools, Vestn. MGTU Stankin, 2010, no. 4, pp. 85–94.
Grigor’ev, S.N., Kuzin, V.V., Burton, D., et al., Influence of Thermal Loads on the Stress-Strain State of Aluminum_Oxide Ceramic Cutting Plates, Russian Engineering Research, 2012, vol. 32, no. 5, pp. 473–477.
Vereshchaka, A.S., Kozochkin, M.P., and Kuzin, V.V., Diagnostics of Coated Hard-Alloy Tools in Operational Conditions, Vestn. Mashinostr., 1988, no. 9, pp. 40–44.
Grigor’ev, S.N., Kuzin, V.V., Burton, D., et al., Influence of Loads on the Stress-Strain State of Aluminum-Oxide Ceramic Cutting Plates, Russian Engineering Research, 2012, vol. 32, no. 1, pp. 61–67.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.V. Kuzin, S.N. Grigor’ev, M.Yu. Fedorov, S.Yu. Fedorov, 2012, published in Vestnik Mashinostroeniya, 2012, No. 8, pp. 73–77.
About this article
Cite this article
Kuzin, V.V., Grigor’ev, S.N., Fedorov, M.Y. et al. Performance of channel cutters with ceramic plates in machining quenched steel. Russ. Engin. Res. 33, 24–28 (2013). https://doi.org/10.3103/S1068798X1211010X
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X1211010X