Abstract
Fatigue tests of threaded joints are required to establish their fatigue strength. The manufacture of bolts, screws, pins, and nuts with MJ metric threads is expedient.
Similar content being viewed by others
References
Tarkhanov, V.I., Fatigue Strength of Bolts at Normal and Low Temperatures, Vestn. Mashinostr., 1972, no. 12, pp. 13–15.
Drozdov, N.A., Baikhov, V.A., Tarkhanov, V.I., and Mokrinskii, V.I., Izv. Vyssh. Uchebn. Zaved., Mashinostr., 1973, no. 4, pp. 33–35.
Reshetov, D.N., Tarkhanov, V.I., and Mokrinskii, V.I., Influence of Flexural Stress on the Fatigue Strength of Bolts, Izv. Vyssh. Uchebn. Zaved., Mashinostr., 1973, no. 7, pp. 36–40.
Tarkhanov, V.I., Cyclic Strength of Threaded Joints at Normal and Low Temperatures, Extended Abstract of Cand. Sci. Dissertation, Bauman Moscow Higher Technical University, Moscow, 1973.
Tarkhanov, V.I., Influence of Sequence of Heat-Treatment Operations and Thread Application in Bolt Manufacture on Joint Strength, Vestn. Mashinostr., 1976, no. 7, pp. 69, 70.
Tarkhanov, V.I., Strength of Galvanized Bolts, Izv. Vyssh. Uchebn. Zaved., Mashinostr., 1979, no. 5, pp. 151–153.
GOST (State Standard) R 52627-2006 (ISO 898-1:1999): Bolts, Screws, and Pins: Mechanical Properties and Test Methods, 2006.
GOST (State Standard) R 52628-2006 (ISO 898-2:1992, ISO 898-6:1994): Nuts: Mechanical Properties and Test Methods, 2006.
GOST (State Standard) 30892-2002 (ISO 5855-1-99, ISO 5855-2-99, ISO 5855-3-99): Metric Thread with MJ Profile, 2002.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.I. Tarkhanov, 2012, published in Vestnik Mashinostroeniya, 2012, No. 3, pp. 87–88.
About this article
Cite this article
Tarkhanov, V.I. Strength of threaded joints. Russ. Engin. Res. 32, 274–275 (2012). https://doi.org/10.3103/S1068798X12030215
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X12030215