References
Emel’yanov, S.G., Simulation of the Geometric Component of the Surface Roughness in Turning, Izv. Kursk. Gos. Tekhn. Univ., 2008, no. 3, pp. 84–89.
Yatsun, E.I., More Efficient Operation of Superhard Tools in Complex Conditions, Mashinostroenie i tekhnosfera XXI veka: Sb. trudov XVII MNTK (Manufacturing and the Technosphere in the Twenty-First Century: Proceedings of the Seventeenth Conference), Donetsk, 2010, vol. 2, pp. 51–52.
Shvets, S.V., Changes in Cutting Characteristics on Turning, Izv. Kursk. Gos. Tekhn. Univ., 2008, no. 4, pp. 8–13.
Vul’f, A.M., Rezanie metallov (Metal Cutting), Leningrad: Mashinostroenie, 1973.
Zorev, N.N., Obrabotka rezaniem tugoplavkikh splavov (Cutting of Refractory Alloys), Moscow: Mashinostroenie, 1966.
Loladze, T.N., Prochnost’ i iznosostoikost’ rezhushchego instrumenta (Strength and Wear Resistance of Cutting Tools), Moscow: Mashinostroenie, 1984.
Bobrov, V.F., Osnovy teorii rezaniya metallov (Principles of Metal-Cutting Theory), Moscow: Mashinostroenie, 1975.
Armarego, E.J.A. and Brown, R.H, The Machining of Metals, Englewood Cliffs, New Jersey: Prentice Hall, 1969.
Shvets, S.V., Systematic Study of Cutting to Improve the Process, Inform. Nov. Tekhnol., 1996, no. 1, pp. 26–29.
Shvets, S.V., Astakhov, V.P., and Osman, M.O.M., A System Approach in Metal Cutting, Proc. CSME Forum, Hamilton, Canada: McMaster University, 1996, pp. 656–663.
Astakhov, V.P., Shvets, S.V., and Osman, M.O.M., Ship Structure Classification Based on Mechanics of Its Formation, Mater. Proc. Technol., 1977, vol. 71/2, pp. 247–257.
Astakhov, V.P., Shvets, S.V., and Osman, M.O.M., The Bending Moment as the Cause of Chip Formation, Manufacturing Science and Engineering: Proceedings of ASME, Dallas, 1997, pp. 53–60.
Storozhev, M.V. and Popov, E.A., Teoriya obrabotka metallov davleniem (Theory of the Pressure Treatment of Metals), Moscow: Mashinostroenie, 1977.
Gubkin, S.I., Osnovy teorii obrabotki metallov davleniem (Theoretical Principles Regarding the Pressure Treatment of Metals), Moscow: Mashgiz, 1959.
Kuznetsov, V.D., Narosty pri rezanii i trenii (Buildup in Cutting and Friction), Moscow: Gos. Izd. Tekhn.-Teor. Lit., 1956.
Author information
Authors and Affiliations
Additional information
Original Russian Text © S.G. Emel’yanov, E.I. Yatsun, S.V. Shvets, A.I. Remnev, E.V. Pavlov, 2011, published in STIN, 2011, No. 9, pp. 30–34.
About this article
Cite this article
Emel’yanov, S.G., Yatsun, E.I., Shvets, S.V. et al. Influence of buildup in lathe processes on tool life and surface quality. Russ. Engin. Res. 31, 1276–1278 (2011). https://doi.org/10.3103/S1068798X11120100
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X11120100