Abstract
A system for graphical identification and classification of combinations of theoretical bases is proposed. This system may be used in the creation of a computer database regarding sets of part configurations in machining.
Similar content being viewed by others
References
Kolybenko, E.N., A Systematic Approach to Basing Theory in Manufacturing, Vestn. Mashinostr., 2004, no. 6, pp. 58–62; no. 8, pp. 67–70; 2005, no. 5, pp. 53–57; no. 6, pp. 66–72; no. 7, pp. 56–62; no. 8, pp. 66–71; no. 9, pp. 75–79.
Kolybenko, E.N. and Bogdanova, N.Yu., A Systematic Approach to Basing Theory in Manufacturing, Vestn. Mashinostr., 2005, no. 10, pp. 56–63.
Abramov, F.N., Classification of Basing Terms in Manufacturing, Vestn. Mashinostr., 2004, no. 6, pp. 58–62; no. 8, pp. 67–70.
Abramov, F.N., Development of Basing Terms in Manufacturing, Vestn. Mashinostr., 2006, no. 2, pp. 67–72; no. 3, pp. 56–61.
Novoselov, Yu.A., A Systematic Analysis of Basing Logic, Vestn. Mashinostr., 2007, no. 3, pp. 62–67.
Suslov, A.G. and Dal’skii, A.M., Nauchnye osnovy tekhnologii mashinostroeniya (Scientific Principles of Manufacturing Technology), Moscow: Mashinostroenie, 2002.
Suslov, A.G., Tekhnologiya mashinostroeniya (Manufacturing Technology), Moscow: Mashinostroenie, 2004.
Kolesov, I.M., Osnovy tekhnologii mashinostroeniya (Principles of Manufacturing Technology), Moscow: Vysshaya Shkola, 1999.
GOST (State Standard) 21495-76: Basing and Bases in Manufacturing: Terms and Definitions, 1976.
GOST (State Standard) 3.1107-81: Supports, Clamps, and Adjustment Elements: Graphical Images, 1982.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © S.A. Shcherbakov, M.P. Kul’geiko, 2011, published in Vestnik Mashinostroeniya, 2011, No. 11, pp. 32–35.
About this article
Cite this article
Shcherbakov, S.A., Kul’geiko, M.P. Formalized definition of part positions in machining. Russ. Engin. Res. 31, 1067–1071 (2011). https://doi.org/10.3103/S1068798X11110232
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X11110232