Abstract
An automated system for thermal-strength calculations of ceramic cutting plates is proposed. This system is based on microstructural and mathematical models and provides information regarding the thermal state and stress-strain state of cutting plates under the action of external loads. The structural nonuniformity of the ceramic is taken into account.
Similar content being viewed by others
References
Volosova, M.A. and Grigor’ev, S.N., Ceramic Cutting Plates: Influence of Abrasive Treatment and Coatings on Their Performance, Vestn. MGTU Stankin, 2011, no. 2, pp. 68–74.
Kuzin, V.V., Development of Coated Cutting Tools Made of Nitride Ceramic, Trakt. i Sel’skokhoz. Mash., 2006, no. 9, pp. 48–52.
Grigor’ev, S.N. and Volosova, M.A., Surface Hardening of Cutting Tools Made of Oxide-Carbide Ceramic, Vestn. Mashinostr., 2005, no. 9, pp. 32–36.
Grigor’ev, S.N. and Borovskii, V.G., Application of Wear-Resistant Coatings to a Cutting Tool Based on Mineral-Ceramic and Cubic Boron Nitride, Obrab. Met.: Tekhnol., Oborud., Instrum., 2003, no. 3, p. 5.
Kuzin, V.V., Microstructural Model of Ceramic Cutting Plates, Vestn. Mashinostr., 2011, no. 5, pp. 72–76.
Kuzin, V.V. and Myachenkov, V.I., Mathematical Model of the Stress-Strain State of a Ceramic Cutting Plate, Vestn. Mashinostr., 2011, no. 10.
Andrievskaya, R.A., Lapin, A.G., and Rymashevskii, G.A., Prochnost’ tugoplavkikh soedinenii (Strength of Refractory Compounds), Moscow: Metallurgiya, 1974, p. 232.
Andrievskaya, R.A. and Spivak, I.I., Nitrid kremniya i materialy na ego osnove (Silicon Nitride and Related Materials), Moscow: Metallurgiya, 1984.
Andrievskaya, R.A. and Spivak, I.I., Prochnost’ tugoplavkikh soedinenii i materialy na ikh osnove (Strength of Refractory Compounds and Related Materials), Chelyabinsk: Metallurgiya, 1989.
Borisenko, V.A., Prochnost’ i tverdost’ tugoplavkikh materialov pri vysokikh temperaturakh (Strength and Hardness of Refractories at High Temperatures), Kiev: Naukova Dumka, 1984.
Bolgar, A.S. and Litvinenko, V.F., Termodinamicheskie svoistva nitridov (Thermodynamic Properties of Nitrides), Kiev: Naukova Dumka, 1980.
Kulikov, I.S., Termodinamika karbidov i nitridov (Thermodynamics of Carbides and Nitrides), Chelyabinsk: Metallurgiya, 1988.
Kosolapova, T.Ya., Andreeva, T.V., Bartnitskaya, T.B., et al., Nemetallicheskie tugoplavkie soedineniya (Nonmetallic Refractories), Moscow: Metallurgiya, 1985.
Poluboyarinov, D.N., Balkevich, V.L., and Popil’skii, R.Ya., Vysokoglinozemistye keramicheskie i ogneupornye materialy (High-Alumina Ceramics and Refractories), Moscow: Gosstroiizdat, 1960.
Samsonov, G.V., Nemetallicheskie nitridy (Nonmetallic Nitrides), Moscow: Metallurgiya, 1969.
Samsonov, G.V. and Vinitskii, I.M., Tugoplavkie soedineniya (Refractory Compounds), Moscow: Metallurgiya, 1976.
Svoistva, poluchenie i primenenie tugoplavkikh soedinenii: Spravochnik (Properties, Production, and Applications of Refractory Compounds), Kosolapova, T.Ya., Ed., Moscow: Metallurgiya, 1986.
Medvedev, V.A., Bergman, G.A., Vasil’ev, V.P., et al., Termicheskie konstanty veshchestv: Spravochnik (Thermal Constants of Materials: A Handbook), Moscow: VINITI, 1968, vols. 3–10.
Termodinamicheskie svoistva neorganicheskikh veshchestv: Spravochnik (Thermodynamic Properties of Inorganic Materials: A Handbook), Zefirov, A.V., Ed., Moscow: Atomizdat, 1965.
Fiziko-khimicheskie svoistva okislov (Physicochemical Properties of Oxides), Samsonov, G.V., Ed., Moscow: Metallurgiya, 1978.
Frantsevich, I.N., Voronov, F.F., and Bakuta, S.A., Uprugie postoyannye i moduli uprugosti metallov i nemetallov (Elastic Constants and Moduli of Metals and Nonmetals), Kiev: Naukova Dumka, 1982.
Raschety mashinostroitel’nykh konstruktsii metodom konechnykh elementov: Spravochnik (Calculations of Manufacturing Structures by the Finite-Element Method), Myachenkov, V.I., Ed., Moscow: Mashinostroenie, 1989.
Author information
Authors and Affiliations
Additional information
Original Russian Text © S.N. Grigor’ev, V.I. Myachenkov, V.V. Kuzin, 2011, published in Vestnik Mashinostroeniya, 2011, No. 11, pp. 26–31.
About this article
Cite this article
Grigor’ev, S.N., Myachenkov, V.I. & Kuzin, V.V. Automated thermal-strength calculations of ceramic cutting plates. Russ. Engin. Res. 31, 1060–1066 (2011). https://doi.org/10.3103/S1068798X11110086
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X11110086