Abstract
The carrying capacity of a soldered joint with a brace on one side is investigated; the eccentric longitudinal tensile force is taken into account.
Similar content being viewed by others
References
Lashko, S.V. and Lashko, N.F., Paika metallov (The Soldering of Metals), Moscow: Mashinostroenie, 1967.
Kuznetsov, O.A. and Pogalov, A.I., Prochnost’ payanykh soedinenii (Strength of Solder Joints), Moscow: Mashinostroenie, 1987.
Feodos’ev, V.I., Soprotivlenie materialov (Strength of Materials), Moscow: Nauka, 1970.
Timoshenko, S.P. and Gere, J.M., Mechanics of Materials, New York: Van Nostrand, 1972.
Spravochnik po paike (Soldering Handbook), Lotsmanov, S.N., Petrunin, I.E., and Frolov, V.P., Eds., Moscow: Mashinostroenie, 1975.
Nikolaev, G.A. and Vinokurov, V.A., Svarnye konstruktsii. Raschet i proektirovanie (Welded Structures: Calculation and Design), Moscow: Vysshaya Shkola, 1990.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © Yu.A. Tsumarev, E.V. Ignatova, 2011, published in Vestnik Mashinostroeniya, 2011, No. 9, pp. 41–44.
About this article
Cite this article
Tsumarev, Y.A., Ignatova, E.V. Carrying capacity of braced soldered joints. Russ. Engin. Res. 31, 856–858 (2011). https://doi.org/10.3103/S1068798X11090255
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X11090255