Abstract
Boron-nitride wheels with large pores are characterized by high permeability and permit defectfree grinding.
Similar content being viewed by others
References
Khudobin, L.V., Mel’nikov, A.N., and Gur’yanikhin, V.F., Aerodynamic Phenomena in Grinding, Tekhnol. Avtomat. Mashinostr., 1975, issue 16, pp. 75–77.
Yashcheritsyn, P.I. and Zaitsev, A.G., Povyshenie kachestva shlifovannykh poverkhnostei i rezhushchikh svoistv abrazivno-almaznogo instrumenta (Improving the Quality of Ground Surfaces and the Cutting Properties of Diamond Tools), Minsk: Nauka i Tekhnika, 1974.
Belov, S.V., Poristye pronitsaemye materialy: Spravochnik (Porous Permeable Materials: A Handbook), Moscow: Mashinostroenie, 1987.
Collins, R., Flow of Fluids through Porous Materials, New York: Reinhold, 1961.
Kremen, Z.I., A New Generation of High-Porous Vitrified CBN Wheels, Ind. Diamond Rev., 2004, no. 4, pp. 53–56.
Kremen’, Z.I. and Lebedev, A.I., Controlling the Porosity of Elbor Grinding Wheels for Greater Applicability, in Tekhnologiya, oborudovanie i avtomatizatsiya mashinostroitel’nogo proizvodstva (Manufacturing Technology, Equipment, and Automation), St. Petersburg: Instrument i Tekhnologii, 2008, no. 30/31, pp. 126–129.
Lebedev, A.I., Contact Temperature in the Grinding of High-Speed Steel by AEROBOR Wheels, Metalloobrabotka, 2007, no. 6, pp. 12–13.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © Z.I. Kremen’, A.I. Lebedev, 2011, published in Vestnik Mashinostroeniya, 2011, No. 9, pp. 61–63.
About this article
Cite this article
Kremen’, Z.I., Lebedev, A.I. High-porosity wheels based on cubic boron nitride for defect-free grinding. Russ. Engin. Res. 31, 867–869 (2011). https://doi.org/10.3103/S1068798X11090164
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X11090164