Abstract
Various combinations of surfaces in the frictional pairs of primary diesel-engine bearings are investigated by computer calculation. The parameters of the gap formed by the frictional surface are calculated, as well as the lubricant volume in the gap.
Similar content being viewed by others
References
Yakushev, A.I., Vzaimozamenyaemost’, standartizatsiya i tekhnicheskie izmereniya (Interchangeability, Standardization, and Engineering Measurements), Moscow: Mashinostroenie, 1987.
Saninskii, V.A., Storchak, N.A., Moskvicheva, N.P., et al., Improving the Computer Determination of the Relative Bulk Errors in Coaxial Frictional Pairs and Their Influence on the Parameters of the Gaps and Lubrication, Tekhnol. Mashinostr., 2010, no. 2, pp. 47–52.
Grebennikov, A.S. and Grebennikov, S.A., Nonuniform Wear of Identical Components and the Life of Internal Combustion Engines, Dvigatelestroenie, 2005, no. 2, pp. 3–9.
Saninskii, V.A., Metodologiya povysheniya zapasa tochnosti korennykh podshipnikov skol’zheniya dizelya razmernoi mekhanicheskoi obrabotkoi i kompyuternoi sborkoi (Methodology for Improving the Precision in Primary Slip Bearings of Diesel Engines by Dimensional Machining and Computer Assembly), Available from VINITI, Yekaterinburg, 2008, no. 793-V2008.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © N.A. Storchak, V.A. Saninskii, Yu.N. Platonova, 2011, published in Vestnik Mashinostroeniya, 2011, No. 5, pp. 40–42.
About this article
Cite this article
Storchak, N.A., Saninskii, V.A. & Platonova, Y.N. Optimal combinations of contact surfaces in coaxial frictional pairs. Russ. Engin. Res. 31, 449–450 (2011). https://doi.org/10.3103/S1068798X11050224
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X11050224