Abstract
A microstructural model of a ceramic cutting plate is developed. It permits the derivation of a calculation scheme for a mathematical model that includes the density, the elastic modulus, the thermal conductivity, the specific heat, the linear expansion coefficient, and Poisson’s ratio.
Similar content being viewed by others
References
Kuzin, V.V., Instrumenty s keramicheskimi rezhushchimi plastinami (Tools with Ceramic Cutting Plates), Moscow: Yanus-K, 2006.
Gnesin, G.G., Trends in the Development of Nonoxide Ceramics, Ogneup. Tekhn. Keram., 2000, no. 5, pp. 2–7.
Evans, A.G. and Landon, T.G., Structural Ceramics, New York: Pergamon, 1980.
Krasulin, Yu.L., Barinov, S.M., and Ivanov, V.S., Struktura i razrushenie materialov iz poroshkov tugoplavkikh soedinenii (Structure and Failure of Materials Made from Refractory Powder), Moscow: Nauka, 1985.
Grigor’ev, S.N. and Volosova, M.A., Surface Hardening of Oxide-Carbide Ceramic Cutting Tools, Vestn. Mashinostr., 2006, no. 9, pp. 32–36.
Kuzin, V.V., Effective Change in High-Density Ceramic for the Manufacture of Cutting and Deforming Tools, Nov. Ogneup., 2010, no. 12, pp. 13–19.
Kuzin, V.V., Anikin, V.N., Fedorov, S.Yu., et al., Wear and Failure of Ceramic Cutting Plates, Vestn. Mashinostr., 2010, no. 11, pp. 50–56.
Applied Strength Problems (Russian translation), Moscow: Mir, 1968.
Khechumov, R.A., Keppler, Kh., and Prokop’ev, V.I., Primenenie metoda konechnykh elementov k raschetu konstruktsii (Calculation of Structures by the Finite-Element Method), Moscow: ASV, 1994.
Antsiferov, A.N., Sokolkin, Yu.V., Chekalkin, A.A., et al., Numerical Model of the Cyclic Life of Structurally Inhomogeneous Powder, Poroshk. Metall., 1994, no. 5/6, pp. 112–118.
Grigor’ev, S.N., Volosova, M.A., and Borovskii, V.G., Improving the Surface Quality of Ceramic Tools to Improve Their Performance in Machining Quenched Steel, Stanki Instrum., 2005, no. 9, pp. 14–19.
Volosova, M.A. and Grigor’ev, S.N., Technological Aspects of the Deposition of Wear-Resistant Nanocoatings for Use in Tool Production, Uprochn. Tekhnol. Pokr., 2010, no. 6, pp. 37–42.
Author information
Authors and Affiliations
Additional information
Original Russian Text © V.V. Kuzin, 2011, published in Vestnik Mashinostroeniya, 2011, No. 5, pp. 72–76.
About this article
Cite this article
Kuzin, V.V. Microstructural model of ceramic cutting plate. Russ. Engin. Res. 31, 479–483 (2011). https://doi.org/10.3103/S1068798X11050121
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X11050121