Abstract
The strain and stress distributions in the external housing of free-running nonfrictional eccentric mechanisms are investigated by the finite-element method. Formulas describing the influence of the housing’s geometric parameters on its stress-strain state are derived.
Similar content being viewed by others
References
Sharkov, O.V. and Zolotov, I.A., Finite-Element Analysis of the Strain of Free-Running Eccentric Mechanisms, Izv. KGTU, 2007, no. 11, pp. 127–130.
Birger, I.A., Shorr, B.Ya., and Iosilevich, G.B., Raschet na prochnost’ detalei mashin (Strength Calculations for Machine Parts), Moscow: Mashinostroenie, 1993.
Boyarshinov, S.V., Osnovy stroitel’noi mekhaniki mashin (Fundamentals of the Structural Mechanics of Machines), Moscow: Mashinostroenie, 1973.
Iskritskii, D.E., Stroitel’naya mekhanika elementov mashin (Structural Mechanics of Machine Parts), Leningrad: Sudostroenie, 1973.
Mamiti, G.I., Calculation of Rings Subject to Distributed Forces in Their Plane, Vestn. Mashinostr., 1978, no. 4, pp. 44–46.
Mashinostroenie. Entsiklopediya (Manufacturing: An Encyclopedia), Kolesnikov, K.S., Ed., Moscow: Mashinostroenie, 1995.
Prochnost’. Ustoichnost’. Kolebaniya: spravochnik (Strength, Stability, and Vibrations: A Handbook), Birger, I.A. and Panovko, Ya.G., Eds., Moscow: Mashinostroenie, 1968.
Bunakov, P.Yu., Skvoznoe proektirovanie v T-FLEX (Comprehensive Design in T-FLEX), Moscow: DMK Press, 2009.
L’vovskii, E.N., Statisticheskie metody postroeniya empiricheskikh formul (Statistical Methods of Constructing Empirical Formulas), Moscow: Vysshaya Shkola, 1988.
Granovskii, V.A. and Siraya, T.N., Metody obrabotki eksperimental’nykh dannykh pri izmereniyakh (Methods of Analysis of Experimental Measurements), Leningrad: Energoatomizdat, 1990.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © O.V. Sharkov, I.A. Zolotov, 2011, published in Vestnik Mashinostroeniya, 2011, No. 4, pp. 41–43.
About this article
Cite this article
Sharkov, O.V., Zolotov, I.A. Influence of the geometric properties of an external housing on its stress-strain state. Russ. Engin. Res. 31, 335–337 (2011). https://doi.org/10.3103/S1068798X11040228
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X11040228