Abstract
The hardness of quartz ceramic is investigated by means of an electronic microhardness meter. The dependence of the hardness on the roasting temperature and on the porosity of the blank is determined.
Similar content being viewed by others
References
Pivinskii, Yu.E. and Suzdal’tsev, E.I., Kvartsevaya keramika i ogneupory (Quartz Ceramic and Refractories), Moscow: Teploenergetik, 2008, vol. 2.
Semko, M.F. and Grabchenko, A.I., Almaznoe shlifovanie sinteticheskikh sverkhtverdykh materialov (Diamond Grinding of Synthetic Superhard Materials), Kharkov: Vishcha Shkola, 1980.
Nogarev, M.V., Dzema, N.V., Rogachev, L.N., and Shkarupa, M.I., Razrabotka progressivnykh tekhnologicheskikh protsessov mekhanicheskoi obrabotki detalei spetsial’nogo naznacheniya iz stekla i keramiki (Development of Progressive Machining Processes for Special-Purpose Glass and Ceramic Components), Obninsk: FGUP ONPP Tekhnologiya, 2008.
Petrukha, P.G. and Markov, A.I., Tekhnologiya obrabotki konstruktsionnykh materialov (Machining Technologies for Structural Materials), Moscow: Vysshaya Shkola, 1992.
Voronin, S.V., Bunova, G.Z., and Yushin, V.D., Computer Study of the Influence of the Actual Structure of Materials on Crack Propagation in Brittle Anisotropic Bodies, Probl. Mashinostr. Avtomat., 2006, no. 4, p. 44.
Lakhtin, Yu.M., Metallovedenie i termicheskaya obrabotka metallov (Physical Metallurgy and Heat Treatment of Metals), Moscow: Metallurgiya, 1989.
Gusev, V.V., Naznachenie rezhimov rezaniya pri almaznom shlifovanii konstruktsionnoi keramiki (Specifying the Cutting Conditions in the Diamond Grinding of Structural Ceramics), Donetsk: Vestnik Nauki DonNTU, 2006.
Bakharev, V.F., Determining the Operational Characteristics of Wear-Resistant Ceramic by Diamond Honing, Mezhdunar. seminar Tekhnika i tekhnologii tribologicheskikh issledovanii (Technology for Tribological Research), Ivanovo: IvGU, 2009.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.A. Rogov, M.I. Shkarupa, 2011, published in Vestnik Mashinostroeniya, 2011, No. 4, pp. 8–11.
About this article
Cite this article
Rogov, V.A., Shkarupa, M.I. Surface layer of quartz-based wear-resistant structural ceramic after machining. Russ. Engin. Res. 31, 302–306 (2011). https://doi.org/10.3103/S1068798X11040216
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X11040216