Abstract
Methods of determining the heat-flux distribution coefficient are analyzed. Thermal processes at the chip-blank contact surface are investigated.
Similar content being viewed by others
References
Reznikov, A.N., Teplofizika rezaniya (Thermal Physics of Cutting), Moscow: Mashinostroenie, 1969.
Kuznetsov, V.D., Fizika rezaniya i treniya metallov i kristallov (Physics of Cutting and Friction of Metals and Crystals), Moscow: Nauka, 1977.
Kudinov, V.A., Temperature Problems of Friction and Buildup in Cutting and Friction, Sukhoe i granichnoe trenie. Friktsionnye materialy. Tr. tret’ei vsesoyuz. konf. po treniyu i iznos v mashinakh (Dry and Boundary Friction: Frictional Materials: Proceedings of the Third All-Union Conference on Friction and Wear in Machines), Kragel’skii, I.V., Ed., Moscow: AN SSSR, 1960, pp. 207–216.
Belousov, A.I., Bobrik, P.I., et al., Thermal Phenomena and Ease of Cutting of Aviation Materials, Tr. MATI (Proceedings of MATI), Moscow: Mashinostroenie, 1966, no. 64.
Shchedrov, V.S., Temperature at Slipping Contact, Trenie i iznos v mashinakh. Sb. tr. IMASHa (Friction and Wear in Machines: Proceedings of the Institute of Mechanical Engineering), Moscow: Izd. AN SSSR, 1955, no. 10, pp. 155–296.
Komarov, V.A., Povyshenie effektivnosti tekhnologicheskikh protsessov na osnove sovershentsvovaniya obrabotki rezaniem (Boosting Technological Efficiency by Improving Cutting Processes), Moscow: MGTU im. N.E. Baumana, 2002.
Vul’f, A.M., Rezanie metallov (Metal Cutting), Leningrad: Mashinostroenie, 1973.
Lopadze, T.N., Prochnost’ i iznosostoikost’ rezhushchego instrumenta (Strength and Wear Resistance of Cutting Tool), Moscow: Mashinostroenie, 1982.
Ryzhkin, A.A., Teplofizicheskie protsessy pri iznashivanii instrumental’nykh rezhushchikh materialov (Thermophysical Processes in the Wear of Cutting-Tool Materials), Rostov-on-Don: DGTU, 2005.
Talantov, N.V., Fizicheskie osnovy protsessa rezaniya, iznashivaniya i razrusheniya intrumenta (Physical Principles of Tool Cutting, Wear, and Destruction), Moscow: Mashinostroenie, 1992.
Reznikov, A.N. and Reznikov, L.A., Teplovye protsessy v tekhnologicheskikh sistemakh (Thermal Processes in Technological Systems), Moscow: Mashinostroenie, 1990.
Carslow, H.S. and Jaeger, J.C., Conduction of Heat in Solids, Oxford: Clarendon, 1959.
Vorontsov, A.L., Sultan-Zade, N.M., and Albagachiev, A.Yu., Development of a New Theory of Cutting. 5. Determining the Kinematic, Stress, and Strain State of Machined Blank, Vestn. Mashinostr., 2008, no. 5, pp. 61–69.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.L. Vorontsov, N.M. Sultan-Zade, A.Yu. Albagachiev, A.I. Savkin, 2011, published in Vestnik Mashinostroeniya, 2011, No. 3, pp. 69–74.
This series of articles began in Vestnik Mashinostroeniya, no. 1, 2001. The next installment will appear in no. 4, 2011.
About this article
Cite this article
Vorontsov, A.L., Sultan-Zade, N.M., Albagachiev, A.Y. et al. Development of a new theory of thermal cutting processes: 15. Determining the temperature fields and contact temperatures in cutting (part 1). Russ. Engin. Res. 31, 258–263 (2011). https://doi.org/10.3103/S1068798X11030294
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X11030294