Abstract
The nanoprocesses that accompany cutting as a result of self-organization are investigated. Means of improving the productivity in automated machining systems are outlined.
Similar content being viewed by others
References
Kudinov, V.A., Dinamika stankov (Machine-Tool Dynamics), Moscow: Mashinostroenie, 1967.
Klushin, M.M., Teoriya rezaniya (Cutting Theory), Gorkii, GPI, 1975.
Haken, H., Synergetics: An Introduction, Berlin: Springer, 1983.
Nicholis, G. and Prigogine, I., Self-Organization in Nonequilibrium Systems, New York: Wiley, 1977.
Ivanova, V.S., Sinergetika. Prochnost’ i razrushenie metallicheskikh materialov (Synergetics: Strength and Disintegration of Metallic Materials), Moscow: Nauka, 1992.
Panin, V.E., Likhachev, V.A., and Grinyaev, Yu.A., Strukturnye urovni deformatsii tverdykh tel (Structural Levels in Solid-State Deformation), Novosibirsk: Nauka, 1985.
Kabaldin, Yu.G., Deformation Mechanisms of Cut Layer and Chip Formation in Cutting, Vestn. Mashinostr., 1993, no. 7, pp. 25–30.
Kabaldin, Yu.G., Thermodynamic Approach to the Analysis of the Sources of Vibration in Cutting, Vestn. Mashinostr., 1994, no. 4, pp. 19–24.
Kabaldin, Yu.G., Friction and Wear in Cutting, Vestn. Mashinostr., 1995, no. 1, pp. 26–31.
Kabaldin, Yu.G., Structural-Energetic Approach to Tool Wear, Vestn. Mashinostr., 1990, no. 2, pp. 62–68.
Kabaldin, Yu.G., Buildup in Metal Cutting, Vestn. Mashinostr., 1995, no. 1, pp. 11–52.
Mokhel’, A.N., Salganik, R.L., and Khristianovich, S.A., Theoretical Description of the Delayed Plastic Deformation of Steel, Plastichnost’ i razrushenie tverdykh tel (Plasticity and Failure of Solids), Moscow: Nauka, 1988.
Rybin, V.V., Bol’shie plasticheskie deformatsii i razrushenie metallov (Large Plastic Deformation and Failure of Metals), Moscow: Metallurgiya, 1986.
Zharkov, I.G., Vibratsii pri rezanii lezviinym instrumentom (Vibration in Blade Cutting), Leningrad: Mashinostroenie, 1986.
Kabaldin, Yu.G., Metal Cutting with Adiabatic Shear of Chip Elements, Vestn. Mashinostr., 1995, no. 7, pp. 19–25.
Makarov, A.D., Optimizatsiya protsessov rezaniya (Optimization of Cutting Processes), Moscow: Mashinostroenie, 1967.
Kabaldin, Yu.G., Bilenko, S.V., and Seryi, S.V., Upravlenie dinamicheskim kachestvom metallorezhushchikh stankov na osnove iskusstvennogo intellekta (Dynamic Quality Control of Metal-Cutting Machines by Means of Artificial Intelligence), Komsomol’sk-on-Amur, KnAGTU, 2004.
Kabaldin, Yu.G., Samoorganizatsiya i nelineinaya dinamika v protsessaskh treniya i iznashivaniya instrumenta pri rezanii (Self-Organization and Nonlinear Dynamics in Tool Friction and Wear during Cutting), Komsomolsk-on-Amur, KnAGTU, 2003.
Kabaldin, Yu.G., Seryi, S.V., Prosolovich, A.V., and Burdasov, E.N., Increasing the Stability of Cutting by Fractal and Wavelet Analysis, Vestn. Mashinostr., 2010, no. 6, pp. 63–71
Pavlov, V.A., Amorphization of Metal and Alloy Structure at Limiting Strain, Fiz. Met. Materialov., 1985, vol. 59,issue 4, pp. 629–646.
Zavodinskii, V.G., Komp’yuternoe modelirovanie atomnoi i elektronnoi struktury nanosystem. Ucheb. pos. (Computer Simulation of the Atomic and Electronic Structure of Nanosystems: A Textbook), Kharabovsk: KhGPU, 2003.
Tsirel’son, V.G., Khimicheskaya svyaz’ i mezhelektronnoe vzaimodeistvie (Chemical Bonds and Electronic Interaction), Moscow: RKhTU, 2004.
Kabaldin, Yu.G., Seryi, S.V., Murav’ev, S.N., et al., Improving Tool Performance by the Deposition of Nanostructural Coatings, Vestn. Mashinostr., 2010, no. 3, pp. 41–48.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © Yu.G. Kabaldin, A.A. Prosolovich, E.G. Kolykhalova, A.A. Utkin, 2011, published in Vestnik Mashinostroeniya, 2011, No. 3, pp. 39–46.
About this article
Cite this article
Kabaldin, Y.G., Prosolovich, A.A., Kolykhalova, E.G. et al. Nanostructuring and self-organization in cutting. Russ. Engin. Res. 31, 224–232 (2011). https://doi.org/10.3103/S1068798X11030117
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X11030117