References
Mokhovikov, A.A., Povyshenie prochnosti otreznykh i kanavochnykh reztsov za schet ravnoprochnoi formy lezviya (Increasing the Strength of Shear and Channel Cutters by Means of Uniform-Strength Blades), Tomsk: TPI, 2004.
Muzykant, Ya.A., Channel Cutting and Trimming on Lathes with Lubricant Supply to the Cutting Zone, Vestn. MGTU Stankin, 2008, no. 2, pp. 49–54.
Mikhailov, S.V., Razvitie teorii formoobrazovaniya i drobleniya struzhki s tsel’yu povysheniya effektivnosti mekhanicheskoi obrabotki plastichnykh materialov (Development of a Theory of Chip Shaping and Fracture for More Efficient Machining of Plastics), Kostroma: KGTU, 2006.
Belogorlov, S.V., Machining Narrow Channels by Hard-Alloy Cutters, Materialy 6-i mezhdunar. nauch.-tekhn. konf. (Proceedings of Sixth International Technical Conference), Bryansk: BGTU, 2008, pp. 273–274.
Lopadze, T.N., Struzhkoobrazovanie pri rezanii (Chip Formation in Cutting), Moscow: Mashgiz, 1952.
Reznikov, A.N., Teplofizika protsessov mekhanicheskoi obrabotki materialov (Thermophysics of Machining), Moscow: Mashinostroenie, 1981.
Author information
Authors and Affiliations
Additional information
Original Russian Text © V.V. Ivanov, S.V. Belogorlov, 2010, published in STIN, 2010, No. 4, pp. 16–18.
About this article
Cite this article
Ivanov, V.V., Belogorlov, S.V. Cutting narrow annular channels. Russ. Engin. Res. 30, 731–733 (2010). https://doi.org/10.3103/S1068798X1007021X
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X1007021X