Abstract
Deficiencies are identified in theoretical work by Khvorostukhin regarding the theory of thermal cutting processes.
Similar content being viewed by others
References
Belousov, A.I., Bobrik, P.I., et al., Teplovye yavleniya i obrabatyvaemost’ rezaniem aviatsionnykh materialov. Tr. MATI (Thermal Phenomena and the Ease of Cutting of Aviation Materials: Proceedings of Moscow Aviation Engineering Institute), Moscow: Mashinostroenie, 1966, no. 64.
Vorontsov, A.L., Sultan-Zade, N.M., and Albagachiev, A.Yu., Development of a New Theory of Cutting. 5. Determining the Kinematic, Stress, and Strain State of Machined Blanks, Vestn. Mashinostr., 2008, no. 5, pp. 61–70.
Vorontsov, A.L., Tekhnologicheskie zadachi teorii plastichnosti (Technological Problems of Plasticity Theory), Moscow: Mashinostroenie, 2006, vol. 3.
Storozhev, M.V. and Popov, E.A., Teoriya obrabotki metallov davleniem (Theory of the Pressure Treatment of Metals), Moscow: Mashinostroenie, 1977.
Semenov, E.I., Kovka i ob’emnaya shtampovka (Forging and Bulk Stamping), Moscow: Vysshaya Shkola, 1972.
Malinin, N.N., Prikladnaya teoriya plastichnosti i polzuchesti (Applied Theory of Plasticity and Creep), Moscow: Mashinostroenie, 1975.
Krokha, V.A., Krivye uprochneniya metallov pri kholodnoi deformatsii (Hardening Curves of Metals in Cold Deformation), Moscow: Mashinostroenie, 1968.
Vorontsov, A.L., Tekhnologicheskie zadachu teorii plastichnosti (Technological Problems of Plasticity Theory), Moscow: Mashinostroenie, 2006, vol. 1.
Vorontsov, A.L., Tekhnologicheskie zadachu teorii plastichnosti (Technological Problems of Plasticity Theory), Moscow: Mashinostroenie, 2006, vol. 2.
Krokha, V.A., Uprochnenie metallov pri kholodnoi plasticheskoi deformatsii: Spravochnik (Hardening of Metals in Cold Plastic Deformation: A Handbook), Moscow: Mashinostroenie, 1980.
Kholodnaya ob’emnaya shtampovka. Spravochnik (Cold Bulk Stamping: A Handbook), Navrotskii, G.A., Ed., Moscow: Mashinostroenie, 1973.
Del’, G.D., Tekhnologicheskaya mekhanika (Technological Mechanics), Moscow: Mashinostroenie, 1978.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.L. Vorontsov, N.M. Sultan-Zade, A.Yu. Albagachiev, A.I. Savkin, 2010, published in Vestnik Mashinostroeniya, 2010, No. 7, pp. 73–76.
This series of articles began in Vestnik Mashinostroeniya, nos. 1–6, 2010. The next installment will appear in no. 8, 2010.
About this article
Cite this article
Vorontsov, A.L., Sultan-Zade, N.M., Albagachiev, A.Y. et al. Development of a new theory of thermal cutting processes 4. Analysis of the basic thermophysical theories of cutting (Part 4). Russ. Engin. Res. 30, 713–716 (2010). https://doi.org/10.3103/S1068798X10070166
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X10070166