Abstract
The basic conditions for producing high-quality parts from lead-bearing fluoroplastic composites are derived, for powders of different particle size and density.
Similar content being viewed by others
References
Istomin, N.P. and Matveevskii, R.M., Friction and Wear of Antifrictional Composites Based on Fluoroplastic-4 with Lead, Vestn. Mashinostr., 1970, no. 2, pp. 47–51.
Istomin, N.P., Antifrictional Properties and Wear Resistance of Fluoroplastic-4 with Different Fillers, Tr. Vsesoyuz. Konf. Novye Materialy v Mashinostroenii. Ser. Sel’skoe Khozyaistvo (Proceedings of an All-Union Conference on New Materials in Manufacturing: Agriculture Series), Moscow: NIIMASh, 1968, pp. 223–235.
Matveevskii, R.M., Pozdnyakov, V.V., and Semenov, A.P., Influence of Fillers on the Wear Resistance of Fluoroplastic-4 in Lubricant-Free Friction at Steel, Plastmassy v podshipnikakh skol’zheniya (Plastics in Slip Bearings), Moscow: Nauka, 1965, pp. 65–74.
Pratt, G.C., Plastic-Based Bearings, Lubrication and Lubricants, Braithwaite, E.R., Ed., Elsevier, 1967, chap. 8.
Rogov, V.E., Development of Modified Antifrictional Materials on the Basis of Polytetrafluoroethylene, Cand. Sci. Dissertation, Yakutsk, 1989.
Rogov, V.E., Self-Ignition of Lead-Bearing Fillers in a Fluoroplastic Matrix on Heat Treatment, Fundamental’nye problemy sovremennogo materialovedeniya (Fundamental Problems of Modern Materials Science), Barnaul: AGTU, 2009, vol. 6, no. 2, pp. 25–30.
Rogov, V.E., Mognonov, D.M., Kornopol’tsev, N.V., et al., Lead-Bearing Antifrictional Materials Based on Polytetrafluoroethylene, Tren. Iznos, 2001, vol. 22, no. 1, pp. 104–108.
Rogov, V.E., Influence of the Grain Size of Lead Powder on the Wear Resistance of Fluoroplastic Composites, Fundamental’nye problemy sovremennogo materialovedeniya (Fundamental Problems of Modern Materials Science), Barnaul: AGTU, 2009, no. 1, pp. 81–89.
Zlobinskii, B.M., Ioffe, V.G., and Zlobinskii, V.V., Vosplamenyaemost’ i toksichnost’ metallov i splavov (Ignition and Toxicity of Metals and Alloys), Moscow: Metallurgiya, 1972.
USSR Inventor’s Certificate 1526245.
Petrenko, F.A., Podshipniki skol’zheniya so vstavkami iz plastichnykh metallov (Slip Bearings with Plastic-Metal Inserts), Moscow: Mashgiz, 1952.
Trenie, iznos i smazka (tribologiya i tribotekhnika) (Friction Wear, and Lubrication: Tribology and Tribological Engineering), Chichinadze, A.V., Ed., Moscow: Mashinostroenie, 2003.
Nikol’skii, A.V., Kozakov, A.T., and Kravchenko, A.N., Dynamics of the Chemical State of Frictional Surfaces in a Metal-Polymer Junction during Frictional Interaction, Tren. Iznos, 1988, vol. 9, no. 5, pp. 861–869.
Mashkov, Yu.K., Ovchar, Z.N., Surikhov, V.I., and Kalistratova, L.F., Kompozitsionnye materialy na osnove politetraftoretilena. Strukturnaya modifikatsiya (Composites Based on Polytetrafluoroethylene: Structural Modification), Moscow: Mashinostroenie, 2005.
Borisenko, E.B., Klassen, N.V., and Savchenko, I.B., Formation and Growth of α-PbF2 in the Plastic Deformation of β-PbF2 Crystals, Fiz. Tverd. Tela, 1997, vol. 39, no. 4, pp. 640–646.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.E. Rogov, 2010, published in Vestnik Mashinostroeniya, 2010, No. 7, pp. 53–58.
About this article
Cite this article
Rogov, V.E. Producing high-quality parts from lead-bearing fluoroplastics. Russ. Engin. Res. 30, 695–699 (2010). https://doi.org/10.3103/S1068798X10070117
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X10070117