Abstract
Deficiencies are identified in theoretical work by Belousov regarding the theory of thermal cutting processes.
Similar content being viewed by others
References
Belousov, A.I., Bobrik, P.I., et al., Teplovye yavleniya i obrabatyvaemost rezaniem aviatsionnykh materialov. Tr. MATI (Thermal Phenomena and the Ease of Cutting of Aviation Materials: Proceedings of Moscow Aviation Engineering Institute), Moscow: Mashinostroenie, 1966.
Vul’f, A.M., Rezanie metallov (Metal Cutting), Leningrad: Mashinostroenie, 1973.
Krokha, V.A., Uprochnenie metallov pri kholodnoi plasticheskoi deformatsii. Spravochnik (Hardening of Metals in Cold Plastic Deformation: A Handbook), Moscow: Mashinostroenie, 1980.
Vorontsov, A.L., Teoriya shtampovki vydavlivaniem (Theory of Pressure Stamping), Moscow: Mashinostroenie, 2004.
Vorontsov, A.L., Sultan-Zade, N.M., and Albagachiev, A.Yu., Development of a New Theory of Cut ting. 2. A Review of Cutting Theory, Vestn. Mashinostr., 2008, no. 2, pp. 67–75.
Kuznetsov, V.D., Fizika rezaniya i treniya metallov i kristallov (Physics of the Cutting and Friction of Metals and Crystals), Moscow: Nauka, 1977.
Reznikov, A.N., Teplofizika rezaniya (Thermal Physics of Cutting), Moscow: Mashinostroenie, 1969.
Talantov, N.V., Fizicheskie osnovy protsessa rezaniya, iznashivaniya i razrusheniya intrumenta (Physical Principles of Tool Cutting Wear, and Destruction), Moscow: Mashinostroenie, 1992.
Ryzhkin, A.A., Teplofizicheskie protsessy pri iznashivanii instrumental’nykh rezhushchikh materialov (Thermophysical Processes in the Wear of Cutting-Tool Materials), Rostov-on-Don: DGTU, 2005.
Silin, S.S., Metod podobiya pri rezanii materialov (Similarity Theory in Cutting), Moscow: Mashinostroenie, 1979.
Lopadze, T.N., Prochnost i izosostoikost rezhushchego instrumenta (Strength and Wear Resistance of Cutting Tool), Moscow: Mashinostroenie, 1982.
Danielyan, A.M., Teplota i iznos instrumentov v protsesse rezaniya metallov (Tool Heating and Wear in Metal Cutting), Moscow: Mashgiz, 1954.
Makarov, A.D., Optimizatsiya protsessov rezaniya (Optimization of Cutting Processes), Moscow: Mashinostroenie, 1976.
Poletika, M.F., Kontaktnye nagruzki na rezhushchikh poverkhnostyakh instrumenta (Contact Loads at the Cutting Surfaces of Tools), Moscow: Mashinostroenie, 1969.
Vorontsov, A.L., Sultan-Zade, N.M., and Albagachiev, A.Yu., Development of a New Theory of Cutting. 9. Practical Calculations of the Cutting Parameters in Turning, Vestn. Mashinostr., 2008, no. 9, pp. 67–76.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.L. Vorontsov, N.M. Sultan-Zade, A.Yu. Albagachiev, A.I. Savkin, 2010, published in Vestnik Mashinostroeniya, 2010, No. 5, pp. 57–65.
This series of articles began in Vestnik Mashinostroeniya, nos. 1–4, 2010. The next installment will appear in no. 6, 2010.
About this article
Cite this article
Vorontsov, A.L., Sultan-Zade, N.M., Albagachiev, A.Y. et al. Development of a new theory of thermal cutting processes 4. Analysis of the basic thermophysical theories of cutting (Part 2). Russ. Engin. Res. 30, 484–492 (2010). https://doi.org/10.3103/S1068798X10050126
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X10050126