Abstract
The difficulties in constructing a theory of the thermal processes in cutting are illustrated by the analysis of theoretical work by Bobrik and his colleagues at Moscow Aviation Engineering Institute.
Similar content being viewed by others
References
Kuznetsov, V.D., Fizika rezaniya i treniya metallov i kristallov (Physics of Cutting and Friction of Metals and Crystals), Moscow: Nauka, 1977.
Lykov, A.V., Teoriya teploprovodnosti (Theory of Heat Conduction), Moscow: Vysshaya Shkola, 1967.
Reznikov, A.N., Teplofizika rezaniya (Thermophysics of Cutting), Moscow: Mashinostroenie, 1969.
Ryzhkin, A.A., Teplofizicheskie protsessy pri iznashivanii instrumental’nykh rezhushchikh materialov (Thermophysical Processes in the Wear of Cutting-Tool Materials), Rostov-on-Don: DGTU, 2005.
Belousov, A.I., Bobrik, P.I., et al., Teplovye yavleniya i obrabatyvaemost rezaniem aviatsionnykh materialov. Tr. MATI (Thermal Phenomena and Ease of Cutting of Aviation Materials: Proceedings of Moscow Aviation Engineering Institute), Moscow: Mashinostroenie, 1966.
Vul’f, A.M., Rezanie metallov (Metal Cutting), Leningrad: Mashinostroenie, 1973.
Talantov, N.V., Fizicheskie osnovy protsessa rezaniya, iznashivaniya i razrusheniya instrumenta (Physical Principles of Tool Cutting Wear, and Destruction), Moscow: Mashinostroenie, 1992.
Semenov, E.I., Kovka i ob’emnaya shtampovka (Forging and Bulk Stamping), Moscow: Vysshaya Shkola, 1972.
Kudinov, V.A., Temperature Aspects of Friction and Buildup in Cutting and Friction, Sukhoe i granichnoe trenie. Funktsionnye materialy. Tr. tret’ei Vsesoyuznoi konferentsii po treniyu i iznosu v mashinakh (Dry and Boundary Friction: Functional Materials: Proceedings of the Third All-Union Conference on Friction and Wear in Machines), Kragel’skii, I.V., Ed., Moscow: Izd. AN SSSR, 1960, pp. 207–216.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.L. Vorontsov, N.M. Sultan-Zade, A.Yu. Albagachiev, A.I. Savkin, 2010, published in Vestnik Mashinostroeniya, 2010, No. 4, pp. 68–71.
This series of articles began in Vestnik Mashinostroeniya, nos. 1–3, 2010. The next installment will appear in no. 5, 2010.
About this article
Cite this article
Vorontsov, A.L., Sultan-Zade, N.M., Albagachiev, A.Y. et al. Development of a new theory of thermal cutting processes 4. Analysis of the basic thermophysical theories of cutting (Part 1). Russ. Engin. Res. 30, 381–384 (2010). https://doi.org/10.3103/S1068798X10040143
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X10040143