Abstract
The deficiencies of existing concepts regarding cutting are analyzed. A new approach is proposed on the basis of a standard experiment with a logical model of cutting.
Similar content being viewed by others
References
Novoselov, Yu.A., Standardization of the System of Cutting Concepts, Stanki Instrum., 2006, no. 6, pp. 22–26.
Novoselov, Yu.A., Research Methodology and the Comprehension and Teaching of Cutting Theory, Vestn. Mashinostr., 2006, no. 10, pp. 53–57.
Novoselov, Yu.A., Formation of Surfaces in Cutting, Stanki Instrum., 2008, no. 1, pp. 25–31.
Novoselov, Yu.A., Optimal-Experiment Method in the Study of Cutting Processes, Vestn. Mashinostr., 2008, no. 5, pp. 70–76.
Novoselov, Yu.A., Universal Kinematic Model of All Blade Cutting Processes, Vestn. Mashinostr., 2008, no. 5, pp. 71–75.
Novoselov, Yu.A., Scientific Principles for the Identification of Cutting Processes and Cutting Tools, Vestn. Mashinostr., 2008, no. 7, pp. 61–71.
Novoselov, Yu.A., Automation of Cutting-Tool Design, Stanki Instrum., 2008, no. 9, pp. 13–21.
Novoselov, Yu.A., Improving the Cognitive Logic of Cutting Processes, Vestn. Mashinostr., 2009, no. 1, pp. 58–65.
Novoselov, Yu.A., Retrospective Analysis of the System of Manufacturing Concepts, Stanki Instrum., 2009, no. 5, pp. 2–7.
Novoselov, Yu.A., Establishing Uniform Fundamental Principles of Cutting Processes, Stanki Instrum., 2009, no. 8, pp. 2–7.
GOST (State Standard) 25762-83: Cutting: Terms, Definitions, and Notation for General Concepts, 1983.
Pankin, A.V., Obrabotka metallov rezaniem (Metal Cutting), Moscow: Mashgiz, 1961.
Granovskii, G.I., Metallorezhushchii instrument. Konstruktsiya i ekspluatatsiya. Spravochnoe posobie (Design and Operation of Metal-Cutting Tools: A Handbook), Moscow: Mashgiz, 1954.
Granovskii, G.I., Kinematika rezaniya (Cutting Kinematics), Moscow: Mashgiz, 1948.
Bobrov, V.F., Zorev, N.N., et al., Razvitie nauki o rezanii metallov (Development of the Science of Metal Cutting), Moscow: Mashinostroenie, 1967.
USSR Invento’s Certificate 8 34416.
Author information
Authors and Affiliations
Additional information
Original Russian Text © Yu.A. Novoselov, 2010, published in Vestnik Mashinostroeniya, 2010, No. 2, pp. 62–72.
About this article
Cite this article
Novoselov, Y.A. Optimal methodology for cutting studies. Russ. Engin. Res. 30, 152–160 (2010). https://doi.org/10.3103/S1068798X10020139
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X10020139