Abstract
The temperature distribution over the chip thickness in cutting is analyzed. For the first time, a mathematical explanation is offered for the types of temperature distribution observed, with illustrative examples.
Similar content being viewed by others
References
Ryzhkin, A.A., Teplofizicheskie protsessy pri iznashivanii instrumental’nykh rezhushchikh materialov (Thermophysical Processes in the Wear of Cutting-Tool Materials), Rostov-on-Don: DGTU, 2005.
Kudinov, V.A., Temperature during Friction and Buildup in Cutting and Friction, Sukhoe i granichnoe trenie. Friktsionnye materialy. Tr. tret’ei Vsesoyuz. konf. po treniyu i iznosu v mashinakh (Dry and Boundary Friction: Frictional Materials: Proceedings of the Third All-Union Conference ion Friction and Wear in Machines), Kragel’skii, I.V., Ed., Moscow: AN SSSR, 1960, pp. 207–216.
Vbrontsov, A.L., Sultan-Zade, N.M., and Albagachiev, A.Yu., Development of a New Theory of Cutting. 2. Current State of the Theory, Vestn. Mashinostr., 2008, no. 2, pp. 56–66.
Vbrontsov, A.L., Sultan-Zade, N.M., and Albagachiev, A.Yu., Development of a New Theory of Cutting. 7. Mathematical Description of Chip Formation, Cutting-Force Pulsation, and Contact Parameters of the Blank with the Rear Cutter Surface, Vestn. Mashinostr., 2008, no. 7, pp. 56–61.
Fizicheskii entsiklopedicheskii slovar’ (Physical Encyclopedic Dictionary), Prokhorov, A.M., Ed., Moscow: Sov. Entsikl., 1983.
Feodos’ev, V.I., Soprotivlenie materialov (Strength of Materials), Moscow: Nauka, 1970.
Krokha, V.A., Uprochnenie metallov pri kholodnoi plasticheskoi deformatsii: Spravochnik (Hardening of Metals in Cold Plastic Deformation: A Handbook), Moscow: Mashinostroenie, 1980.
Vbrontsov, A.L., Sultan-Zade, N.M., and Albagachiev, A.Yu., Development of a New Theory of Cutting. 5. Determining the Kinematic, Stress, and Strain States of the Blank, Vestn. Mashinostr., 2008, no. 5, pp. 61–69.
Vbrontsov, A.L., Sultan-Zade, N.M., and Albagachiev, A.Yu., Development of a New Theory of Cutting. 8. Method of Chip-Breaker Design, Vestn. Mashinostr., 2008, no. 8, pp. 61–68.
Author information
Authors and Affiliations
Corresponding author
Additional information
This series of articles began in Vestnik Mashinostroeniya, no. 1, 2010. The next installment will appear in no. 3, 2010.
Original Russian Text © A.L. Vorontsov, N.M. Sultan-Zade, A.Yu. Albagachiev, A.I. Savkin, 2010, published in Vestnik Mashinostroeniya, 2010, No. 2, pp. 59–62.
About this article
Cite this article
Vorontsov, A.L., Sultan-Zade, N.M., Albagachiev, A.Y. et al. Development of a new theory of thermal cutting processes 2. Temperature distribution over the chip thickness. Russ. Engin. Res. 30, 149–151 (2010). https://doi.org/10.3103/S1068798X10020127
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X10020127