Abstract
A new description of chip formation with a developed plastic-deformation zone is proposed; the tool’s geometric parameters are taken into account. A method is proposed for calculating the stress-strain state on the basis of a rigid-plastic model, without hardening of the blank.
Similar content being viewed by others
References
Storozhev, M.V. and Popov, E.A., Teoriya obrabotki metallov davleniem (Theory of the Pressure Treatment of Metals), Moscow: Mashinostroenie, 1977.
Petrushin, S.I. and Proskokov, A.V., Theory of Constrained Cutting: Chip Formation with a Developed Plastic-Deformation Zone, Vestn. Mashinostr., 2010, no. 1.
Proskokov, A. V., Improving the Performance of Cutters with Replaceable Hard-Alloy Plates by Regulating the Heat Transfer in the Cutting Zone, Cand. Sci. Dissertation, Yurga Technological Institute, Yurga, 2007.
Zorev, N.N., Voprosy mekhaniki protsessa rezaniya metallov (Mechanics of Metal Cutting), Moscow: Mashgiz, 1956.
Petrushin, S.I., Optimal’noe proektrovanie rabochei chasti rezhushchikh instrumentov (Optimal Functional Design of Cutting Tools), Tomsk: Izd. TPU, 2008.
Gol’dshmidt, M.G., Deformatsii i napryazheniya pri rezanii metallov (Strain and Stress in Metal Cutting), Tomsk: STT, 2001.
Petrushin, S.I., Vvedenie v teoriyu nesvobodnogo rezaniya materialov (Introduction to the Theory of Constrained Cutting), Tomsk: Izd. TPU, 1999.
Petrushin, S.I. and Proskokov, A.V., Theory of Constrained Cutting: Geometry of Constrained Cutting, Vestn. Mashinostr., 2009, no. 11, pp. 56–63.
Petrushin, S.I. and Proskokov, A.V., Theory of Constrained Cutting: Chip Formation with a Single Conditional Shear Surface, Vestn. Mashinostr., 2009, no. 12, pp. 58–64.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © S.I. Petrushin, A.V. Proskokov, 2010, published in Vestnik Mashinostroeniya, 2010, No. 2, pp. 40–44.
About this article
Cite this article
Petrushin, S.I., Proskokov, A.V. Theory of constrained cutting: Calculating the stress-strain state in the cutting zone. Russ. Engin. Res. 30, 133–137 (2010). https://doi.org/10.3103/S1068798X10020085
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X10020085