Abstract
A sufficient condition for static balancing of rotating bodies is derived. An example of the verification of balancing is considered.
Similar content being viewed by others
References
Levit, M.E., Agafonov, Yu.A., Vaingortin, L.D., et al., Spravochnik po balansirovke (Handbook on Balancing), Moscow: Mashinostroenie, 1992.
GOST (State Standard) 19534-74: Balancing of Rotary Systems: Terms, 1974.
Berkovich, M.D., Sily inertsii v tekhnike i ikh uravnoveshivanie (Inertial Forces in Engineering and Balancing), Moscow-Kiev: Mashgiz, 1963.
Ryan, D., Field Balancing of Rotors, Elec. J. Petts., 1928, vol. 25, no. 12.
Vibratsii v tekhnike: Spravochnik. T.6. Zashchita ot vibratsii i udarov (Vibration in Engineering: A Handbook, Vol. 6: Protection from Vibrations and Shocks), Frolov, K.V., Ed., Moscow: Mashinostroenie, 1981.
GOST (State Standard) ISO 1940-73: Quality Requirements on the Balancing of Rigid Rotors, 2008.
GOST (State Standard) 22061-76: Machines and Technological Equipment: System of Classes and Balancing Precision: Basic Principles, 1984.
Den Hartog, J.P., Mechanical Vibrations, New York: McGraw-Hill, 1934.
Polushkin, O.A., Finding and Developing Methods of Optimal Standardization of the Residual Rotor Imbalance in Harvesters, Cand. Sci. Dissertation, Rostov-on-Don Institute of Agricultural Machinery, Rostov-on-Don, 1968.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © O.O. Polushkin, 2010, published in Vestnik Mashinostroeniya, 2010, No. 2, pp. 29–32.
About this article
Cite this article
Polushkin, O.O. Static balancing of rotating bodies. Russ. Engin. Res. 30, 125–127 (2010). https://doi.org/10.3103/S1068798X10020061
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X10020061