Abstract
The main factors influencing the basing precision of blanks with holes on cylindrical and truncated pins are described. Analytic formulas are derived for the basing errors, taking account of the factors individually and as an aggregate. Means of minimizing the probable basing errors are recommended.
Similar content being viewed by others
References
Abramov, F.N., Developing Effective Basing Terminology in Manufacturing, Vestn. Mashinostr., 2006, no. 2, pp. 67–72.
Abramov, F.N., Classification of Basing Terms in Manufacturing, Vestn. Mashinostr., 2006, no. 3, pp. 56–61.
Abramov, F.N., Essential Aspects of Basing in Manufacturing, Vestn. Mashinostr., 2007, no. 6, pp. 74–77.
Abramov, F.N., Influence of Shape Error and Mutual Position of the Base Surfaces on the Basing Precision of Prismatic Blanks with Base Matching, Vestn. Mashinostr., 2007, no. 7, pp. 54–64.
Prilutskii, V.A., Basing Precision of Blanks at Supporting Pins, Stanki Instrum., 1983, no. 8, pp. 31–33.
Prilutskii, V.A., Calculating the Basing Precision of Blanks at Supports, Stanki Instrum., 1989, no. 1, pp. 22,23.
Kolker, Ya.D. and Rudnev, O.N., Bazirovanie i bazy v mashinostroenii (Basing and Bases in manufacturing), Kiev: Vishcha Shkola, 1991.
Koganoy, L.A. and Kaplan, D.S., Osnovy bazirovaniya: Uchebnoe posobie (Basing Principles: A Textbook), Tula: TulGTU, 1993.
Stanochnye prisposobleniya: Spravochnik (Machine-Tool Attachments: A Handbook), Vardashkin, B.N and Shatilov, A.A. Eds., Moscow: Mashinostroenie, 1984, vol. 1.
Author information
Authors and Affiliations
Additional information
Original Russian Text © F.N. Abramov, 2010, published in Vestnik Mashinostroeniya, 2010, No. 1, pp. 58–66.
About this article
Cite this article
Abramov, F.N. Precision basing of blanks with holes on cylindrical and truncated pins. Russ. Engin. Res. 30, 51–60 (2010). https://doi.org/10.3103/S1068798X10010120
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X10010120