References
Kudinov, V.A., Dinamika stankov (Dynamics of Machine Tools), Moscow: Mashinostroenie, 1967.
Savkin, Yu.N., Zhiganov, V.I., and Kozlovskii, A.V., Transfer Functions of Components at Slipping Guides, Stanki Instrum., 1994, no. 4, pp. 15–17.
Zhiganov, V.I., Dynamic Modular Optimization in Creating Precision Lathes, Stanki Instrum., 2005, no. 6, pp. 7–9.
Sankin, Yu.N., Dinamika nesushchikh sistem metallorezhushchikh stankov (Dynamics of the Supporting Systems in Metal-Cutting Machine Tools), Moscow: Mashinostroenie, 1986.
El’yasberg, M.E., Avtokolebaniya v metallorezhushchikh stankakh (Self-Oscillations in Metal-Cutting Machine Tools), St. Petersburg: OKBS, 1993.
Pronikov, A.S., Programmyi metod ispytaniya metallorezhushchikh stankov (Programmed Test Method for Metal-Cutting Machines), Moscow: Mashinostroenie, 1985.
Kirilin, Yu.V. and Eremin, N.V., Simulating the Joints in Basic Machine-Tool Components, Stanki Instrum., 2007, no. 9, pp. 7–11.
Yakovlev, S.A. and Zhigalov, V.I., Electromechanical Treatment on Screw-Cutting Lathes, Stanki Instrum., 2000, no. 6, pp. 24–26.
Metodika vybora i optimizatsii kontroliruemykh parametrov tekhnologicheskikh protsessov (Methods of Selecting and Optimizing Controllable Process Parameters), Moscow: Izd. Standartov, 1978.
Ukazaniya po vnedreniyu protsessov elektromekhanicheskoi obrabotki v proizvodstvo (Notes on the Introduction of Electromechanical Treatment in Production), Ulyanovsk: USKhI, 1987.
Zhiganov, V.I., Innovations: Lathe Development, Diversification, and Updating, Stanki Instrum., 2006, no. 12, pp. 2–5.
Russian Patent 2271919.
Zhiganov, V.I., Nekotorye sposoby uluchsheniya dinamicheskikh kharakteristik tekhnologicheskoi sistemy tokarnogo stanka. Sb. trudov II VPNK Molodezh i nauka 21 veka (Improving Lathe Dynamics: Proceedings of the Second Russian Conference on Youth and Science in the Twenty-First Century), Ulyanovsk: UGSKhA, 2007.
Zhiganov, V.I., Producing Regular Directional Microrelief at Frictional Surfaces, Materialy 10-i MNPK Tekhnologiya remonta, vosstanovleniya i uprochneniya detalei mashin, mekhanizmov, oborudovaniya, instrumenta i tekhnologischeskoi osnastki (Proceedings of Tenth Conference on the Repair, Restoration, and Hardening of Machine Parts, Tools, and Technological Equipment), St. Petersburg: SpGPU (NPF Plazmatsentr), 2008, p. 40.
Balikhin, V.V., Surface Hardening and Vibrational Milling of Repaired Parts, Materialy 10-i MNPK Tekhnologiya remonta, vosstanovleniya i uprochneniya detalei mashin, mekhanizmov, oborudovaniya, instrumenta i tekhnologischeskoi osnastki (Proceedings of Tenth Conference on the Repair, Restoration, and Hardening of Machine Parts, Tools, and Technological Equipment), St. Petersburg: SpGPU (NPF Plazmatsentr), 2008, p. 55.
Shneider, Yu.G., Ekspluatatsionnye svoistva detalei s regulyarnym mikrorel’efom (Operational Properties of Parts with Regular Microrelief), Leningrad: Mashinostroenie, 1982.
Author information
Authors and Affiliations
Additional information
Original Russian Text © V.I. Zhiganov, R.Sh. Khalimov, 2009, published in STIN, 2009, No. 4, pp. 2–6.
About this article
Cite this article
Zhiganov, V.I., Khalimov, R.S. Electromechanical surface treatment of slipping guides in metal-cutting machines. Russ. Engin. Res. 29, 714–718 (2009). https://doi.org/10.3103/S1068798X09070156
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X09070156