References
Eptelis, S.G., Berliner, E.M., Godlevskii, V.A., et al., Smazochno-okhlazhdayushchie tekhnologicheskie sredstva dlya obrabotki metallov rezaniem (Lubricant and Cooling Fluids for Metal Cutting), Moscow: Mashinostroenie, 1995.
Vereshchaka, A.S. and Vereshchaka, A.A., Creating Functional Coatings for Cutting Tools, Sovremennye tekhnologii v mashinostroenii (Up-To-Date Technologies in Manufacturing), Khar’kov: NTU KhPI, 2007, pp. 192–235.
Latyshev, V.N., Naumov, A.G., Bushuev, A.E., and Vereshchaka, A.S., Ecologically Benign Lubricant and Coolant Fluids, Vestn. Mashinostr., 1999, no. 7, pp. 32–35.
Vereshchaka, A.S., Poloskin, Yu.V., Kirillov, A.K., and Khaustova, O.Yu., Analysis of the Environmental Impact of Dry Cutting, Vysokie tekhnologii: tendentsii razvitiya: Materialy XII mezhdunar. nauch.-tekhn. seminara (Trends in High Technology: Proceedings of the Twelfth International Seminar), Khar’kov: NTU KhPI, 2002, pp. 9–16.
Kirillov, A.K., Creating a Dry-Cutting System with Compensation of the Effects of the Lubricant and Coolant Fluid in Turning Structural Materials, Avtomat. Sovrem. Tekhnol., 2006, no. 1, pp. 9–16.
Kozlov, A.A., Robakidze, Z.Yu., et al., Influence of the Frequency of Tangential Vibrations in Ultrasound Treatment on Tool Life, Yubileinaya nauch.-prakt. konf. uchenykh i spetsialistov FGUP PNPO izmeritel’noi tekhniki (Jubilee Conference of Scientists and Specialists at the Measuring-Technology Research and Production Enterprise), Korolev: Korolev FGUP, 2006, pp. 360–363.
Akhmetzyatsov, I.D., Bedunkevich, V.V., and Il’in, V.I., Dry Electrostatic Cooling in Metal Cutting, Elektronn. Obrab. Mater., 1991, no. 5, pp. 71–74.
Vereshchaka, A.S., Use and Improvement of Cutting Tools with Wear-Resistant Coatings, Stanki Instrum., 2000, no. 9, pp. 33–40.
Vereshchaka, A.S., Rabotosposobnost rezhushchego instrumenta s iznosostoikimi pokrytiyami (Performance of Cutting Tools with Wear-Resistant Coatings), Moscow: Mashinostroenie, 1993.
Author information
Authors and Affiliations
Additional information
Original Russian Text © A.K. Kirillov, A.S. Vereshchaka, A.A. Kozlov, Z.Yu. Robakidze, 2009, published in STIN, 2009, No. 1, pp. 35–40.
About this article
Cite this article
Kirillov, A.K., Vereshchaka, A.S., Kozlov, A.A. et al. Dry cutting of hard-to-machine materials, with compensation of the physical functions of the lubricant and coolant fluid. Russ. Engin. Res. 29, 433–437 (2009). https://doi.org/10.3103/S1068798X09040248
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X09040248