References
Lipatov, A.A., Influence of Unstable Chip Formation on the Wear of Hard-Alloy Tools in Cutting Austenitic Steel, Stanki Instrum., 2008, no. 6, pp. 17–19.
Lipatov, A.A., Influence of the Blunting Criterion on Hard-Alloy Selection in Turning Austenitic Steel, Stanki Instrum., 2006, no. 6, pp. 16–17.
Gurevich, Ya.L., Gorokhov, N.V., Zakharov, V.I., et al., Rezhim rezaniya trudnoobrabatyvaemykh materialov: Spravochnik (Cutting Conditions for Hard-To-Work Materials: A Handbook), Moscow: Mashinostroenie, 1986.
Dudkin, M.E., Eikhmayas, E.F., and Belova, E.N., Influence of the Grain Size of WC Phase on the Cutting Properties of Tungsten-Cobalt Hard Alloys, Struktura i svoistva tverdykh splavov: Sb. nauch. trudov VNIITS (Structure and Properties of Hard Alloys: Proceedings of the All-Union Scientific-Research Institute of Hard Alloys), Moscow: Metallurgiya, 1983, pp. 16–19.
Tret’yakov, V.I., Osnovy metallovedeniya i tekhnologii proizvodstva spechennykh tverdykh splavov (Metallurgical Principles and Production Technology for Sintered Hard Alloys), Moscow: Metallurgiya, 1976.
Additional information
Original Russian Text © A.A. Lipatov, 2008, published in STIN, 2008, No. 9, pp. 33–35.
About this article
Cite this article
Lipatov, A.A. Influence of the carbide-grain size on the cutting properties and wear of hard tungsten-cobalt alloys when turning austenitic steel. Russ. Engin. Res. 28, 1252–1254 (2008). https://doi.org/10.3103/S1068798X08120216
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X08120216