References
Segal, M.G. and Sheiko, L.I., Fundamental Design Principles for Multicoordinate Gear-Cutting Machine Tools for Conical Gears, Stanki Instrum., 1998, no. 4, pp. 6–8.
Segal, M.G. and Sheiko, L.I., Classifying the Configurations of Multicoordinate Machine Tools for Cutting Conical Gears with Curvilinear Teeth, Stanki Instrum., 1998, no. 7, pp. 8–11.
Sheiko, L.I., Structural Analysis of the Configurations of Multicoordinate Gear-Cutting Machine Tools for Conical and Hypoid Transmissions, Stanki Instrum., 2001, no. 3, pp. 6–10.
Sheiko, L.I. and Prikazchikov, S.Ya., Motion of the Executive Elements in Multicoordinate Gear-Cutting Machine Tools, Stanki Instrum., 2003, no. 6, pp. 15–20.
Lopato, G.A., Kabatov, N.F., and Segal, M.G., Konicheskie i gipoidnye peredachi s krugovymi zub’yami (Conical and Hypoid Transmissions with Circular Teeth), Moscow: Mashinostroenie, 1977.
Vasil’ev, A.V. and Sheiko, L.I., Determining the Range of Conical Gears with Circular Teeth Machined on a Gear-Cutting Machine Tool, Issledovanie stankov i instrumentov dlya obrabotki slozhnykh i tochnykh poverkhnostei: Mezhvuz. nauch. sb. (Machine Tools and Tools for Machining Complex and Precision Surfaces: An Interuniversity Anthology), Saratov: SGTU, 1998, pp. 15–19.
Segal, M.G., Romalis, M.M., and Krichalo, G.A., Improving the Machining of Conical and Hypoid Transmissions, Stanki. Instrum., 1986, no. 5, pp. 19–21.
Reklaitis, G., Ravindran, A., and Ragsdale, K., Engineering Optimization: Methods and Applications, New York: Wiley, 1983.
Additional information
Original Russian Text © L.I. Sheiko, S.Ya. Prikazchikov, 2008, published in STIN, 2008, No. 5, pp. 3–6.
About this article
Cite this article
Sheiko, L.I., Prikazchikov, S.Y. Minimizing the space occupied by multicoordinate gear-cutting machine tools for the manufacture of conical and hypoid transmissions. Russ. Engin. Res. 28, 801–803 (2008). https://doi.org/10.3103/S1068798X08080169
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X08080169