Abstract
Brittle new tensosensitive coatings of E-23 epoxy resin are investigated. The influence of the method of application and the layer thickness on the properties of such coatings is established. The accuracy with which the stress-strain state of samples may be determined by means of these coatings is estimated.
Similar content being viewed by others
References
Prigorovskii, N.I. and Panskikh, V.K., Metod khrupkikh tenzochuvstvitel’nykh pokrytii (Method of Brittle Tensosensitive Coatings), Moscow: Nauka, 1978.
Prigorovskii, N.I., Metody i sredstva opredeleniya polei deformatsii i napryazhenii (Methods of Determining Strain and Stress Fields), Moscow: Mashinostroenie, 1983.
Raschety i ispytaniya na prochnost. Metod khrupkikh pokrytii dlya opredeleniya deformatsii (Strength Calculation and Testing: Brittle Coating Method for Strain Determination), Moscow, 1985.
Ushakov, B.N. and Salin, A.N., Determining the Stress in Complex Parts Using Brittle Tensosensitive Coatings, Vestn. Mashinostr., 1993, no. 1, pp. 14–16.
Peterson, R., Stress-Concentration Factors, New York: Wiley, 1974.
Author information
Authors and Affiliations
Additional information
Original Russian Text © A.N. Salin, A.I. Dolinnyi, 2008, published in Vestnik Mashinostroeniya, 2008, No. 8, pp. 58–61.
About this article
Cite this article
Salin, A.N., Dolinnyi, A.I. Brittle tensosensitive coatings for determining the stress-strain state of parts and structures. Russ. Engin. Res. 28, 782–785 (2008). https://doi.org/10.3103/S1068798X0808011X
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X0808011X