References
Curtis, D.N., Spear, G.M., and Baxter, M.L., Computer-Optimized Generating Cycle for Cutting Hypoid Pinions, Advances in Machine Tool and Design Research, 1968, part 2, pp. 915–928.
Il’in, N.M. and Segal’, M.G., Determining the Parameters of Cuts in the Rough Cutting of Conical and Hypoid Transmissions with Circular Teeth by the Rolling Method, Issledovaniya v oblasti stankov i instrumentov: Mezhvuz. sb. nauch. trudov (Research on Machine Tools and Tools: An Interuniversity Collection), Saratov: SPI, 1977, pp. 105–112.
Kalashnikov, S.N., Zuboreznye reztsovye golovki (Gear-Cutting Heads), Moscow: Mashinostroenie, 1972.
Segal’, M.G. and Il’in, N.M., Determining the Supply Law with Variable Cut Geometry in Rough Cutting of Conical Gears, Izv. Vyssh. Uchebn. Zaved., Mashinostr., 1979, no. 7, pp. 115–118.
Additional information
Original Russian Text © N.M. Il’in, 2008, published in STIN, 2008, No. 4, pp. 26–28.
About this article
Cite this article
Il’in, N.M. Simulation of the cutting of conical and hypoid gears in roughing. Russ. Engin. Res. 28, 717–719 (2008). https://doi.org/10.3103/S1068798X08070198
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X08070198