Abstract
For the example of a roller bearing, some contact strength problems and calculation principles are considered. Quenched high-strength steel parts of various shapes are investigated, taking account of friction.
Similar content being viewed by others
References
Rabotnov, Yu.N., Soprotivlenie materialov (Strength of Materials), Moscow: Fizmatgiz, 1962, pp. 352–369.
Chermenskii, O.N. and Fedotov, N.N., Podshipniki kacheniya: Spravochnik-katalog (Roller Bearings: A Handbook and Catalog), Moscow: Mashinostroenie, 2003.
Chermenskii, O.N., Plasticity Theory in Engineering Practice: A Handbook, Inzh. Zh., 2001, no. 7, appendix.
Tomlenov, A.D., Teoriya plasticheskogo deformirovaniya metallov (Theory of the Plastic Deformation of Metals), Moscow: Metallurgiya, 1972.
Chermenskii, O.N., Limiting Load on a Plane Base, Mashinovedenie, 1989, no. 6, pp. 30–33.
Chermenskii, O.N., Carrying Capacity of a Plane Part with a Slope, Vestn. Mashinostr., 2001, no. 5, pp. 21–25.
Chermenskii, O.N., Compression of an Obtuse Asymmetric Wedge, Mashinovedenie, 1972, no. 1, pp. 95–98.
Chermenskii, O.N., Compression of a Projection with Concave Free Surfaces, Mashinovedenie, 1973, no. 1, pp. 115–118.
Chermenskii, O.N., Limiting Load on a Convex Cylindrical Body, Vestn. Mashinostr., 2006, no. 9, pp. 16–19.
Chermenskii, O.N., Determining the Carrying Capacity of a Plane Quenched-Steel Base in Contact with a Rigid Cylinder and Sphere, Mashinovedenie, 1976, no. 4, pp. 21–26.
Chermenskii, O.N. and Spitsyna, I.N., Yield Stress at Limiting Load in Static and Dynamic Conditions, Mashinovedenie, 1989, no. 3, pp. 21–26.
Ivlev, D.D. and Nepershin, R.I., Introducing a Spherical Stamp in a Rigid-Plastic Space, Izv. Akad. Nauk SSSR, Mekhan. Tverd. Tela, 1973, no. 4.
Druyanov, B.A. and Nepershin, R.I., Problems of Technological Plasticity, New York: Elsevier, 1994.
Nesterov, V.M., Orlov, A.V., and Chermenskii, O.N., Influence of the Load, the Hardness of the Material, and the Number of Loading Cycles on the Modification and Pliability of Working Surfaces in Rolling, Mashinovedenie, 1975, no. 3, pp. 102–108.
Author information
Authors and Affiliations
Additional information
Original Russian Text © O.N. Chermenskii, O.A. Ryakovskii, 2008, published in Vestnik Mashinostroeniya, 2008, No. 7, pp. 3–8.
About this article
Cite this article
Chermenskii, O.N., Ryakovskii, O.A. Contact strength calculations. Russ. Engin. Res. 28, 625–631 (2008). https://doi.org/10.3103/S1068798X08070010
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X08070010