References
Pronikov, A.S., Parametricheskaya nadezhnost’ mashin (Parametric Reliability of Machines), Moscow: MGTU im. N.E. Baumana, 2002.
Mashinostroenie: Entsiklopediya, T. VI-7, Metallorezhushchie stanki i derevoobrabatyvayushchee oborudovanie (Encylopedia of Manufacturing, vol. VI-7, Metal-Cutting Machine Tools and Woodworking Equipment), Cherpakov, B.I., Ed., Moscow: Mashinostroenie, 1999.
Kosilova, A.G., Meshcheryakov, R.K., and Kalinin, M.A., Tochnost’ obrabotki, zagotovki i pripuski v mashinostroenii. Spravochnik tekhnologa (Precision of Machining, Blanks, and Margins in Manufacturing: Technologist’s Handbook), Moscow: Mashinostroenie, 1976.
Starodubov, V.S., Design Methods of Improving the Precision of Numerically Controlled Machine Tools, Tekhnol. Met., 2001, no. 6, pp. 18–24.
Politekhnicheskii slovar’ (Polytechnic Dictionary), Artobolevskii, I.I., Ed., Moscow: Sovetskaya Entsiklopediya, 1977.
Bazrov, B.M., Raschet tochnosti mashin na EVM (Computer Calculation of Machine Precision), Moscow: Mashinostroenie, 1984.
Starodubov, V.S. and Shapovalov, A.B., Reducing the Errors of Numerically Controlled Metal-Cutting Machine Tools, Izv. Vyssh. Uchebn. Zaved., Ser. Mashinostr., 1985, no. 1, pp. 125–130.
Push, V.E., Malye peremeshcheniya v stankakh (Small Displacements in Machine Tools), Moscow: Mashgiz, 1961.
Push, A.V., Basic Design Principles for Precision and Superprecision Machine Tools, Stanki Instrum., 1999, no. 3, pp. 12–14.
USSR Inventor’s Certificate 1041226A.
Borisov, E.I., Increasing the Machining Precision in Multipurpose Numerically Controlled Machine Tools, Stanki s ChPU, uchastki i avtomaticheskie linii na ikh osnove (Numerically Controlled Machined Tools and Corresponding Systems and Automatic Lines), Moscow: MDNTP im. F.E. Dzerzhinskogo, 1974, pp. 163–170.
Yurin, V.N., Spindle Units with Heat Tubes, Stanki Instrum., 1981, no. 4, pp. 16–18.
Wiele, N. and Rabe, C., Einsatz von Wärmerohren zur thermischen Stabilisierung von Werkzeugmaschinen, Maschinenbautech., 1979, vol. 28, no. 4, pp. 160–162.
Churin, I.N., Tsirlin, M.M., Shchelkunov, B.P., and Fedorov, A.I., Freon Cooling Unit for Reducing the Temperature Deformation of Machine Tools, Vestn. Mashinostr., 1975, no. 4, pp. 55–57.
Niedrige Spindeltemperaturen durch Öl-Luft-Schmierung, Kugellager Z., 1981, no. 208, pp. 4–10.
Sokolov, Yu.N., Temperaturnye raschety v stankostroenii (Temperature Calculations in Machine-Tool Design), Moscow: Mashinostroenie, 1968.
Alferov, V.I., Experimental Determination of the Temperature Conditions in a Production Shop, Stanki Instrum., 1970, no. 2, pp. 17–19.
Volkova, Yu.Z. and Yudin, M.Ya., Design and Operation of Thermostatted Shops, Stanki Instrum., 1977, no. 7, pp. 13–15.
Reshetov, D.N., Povyshenie tochnosti metallorezhushchikh stankov: Obzor (Increasing the Precision of Metal-Cutting Machine Tools: A Review), Moscow: NIIMASh, 1979.
Author information
Authors and Affiliations
Additional information
Original Russian Text © V.S. Starodubov, 2008, published in Vestnik Mashinostroeniya, 2008, No. 2, pp. 48–53.
About this article
Cite this article
Starodubov, V.S. Reducing and correcting the temperature deformation of numerically controlled machine tools. Russ. Engin. Res. 28, 135–143 (2008). https://doi.org/10.3103/S1068798X08020081
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X08020081