References
Baikalov, A.K., Vvedenie v teoriyu shlifovaniya materialov (Introduction to the Theory of Grinding), Kiev: Naukova Dumka, 1978.
Korolev, A.V. and Novoselov, Yu.K., Teoretiko-veroyatnostnye osnovy abrazivnoi obrabotki, Ch. 1: Sostoyanie rabochei povverkhnosti abrazivnogo instrumenta (Probabilistic Analysis of Abrasive Machining, Vol. 1, State of the Working Surface of the Working Tool), Saratov: Izd. Sarat. Univ., 1987.
Korolev, A.V. and Novoselov, Yu.K., Teoretiko-veroyatnostnye osnovy abrazivnoi obrabotki, Ch. 2: Vzaimodeistvie instrumenta i zagotovki pri abrazivnoi obrabotke (Probabilistic Analysis of Abrasive Machining, Vol. 2, Interaction of the Tool and the Blank in Abrasive Machining), Saratov: Izd. Sarat. Univ., 1989.
Bishutin, S.G., Simulation of the Formation of Surface Microinhomogeneities in Grinding, Taking Account of Tool Wear, Probl. Mashinostr. Nadezhnosti Mash., 2005, no. 1, pp. 78–82.
Kozlov, A.M., Determining the Working-Surface Parameters of an Abrasive Tool by Simulation, Izv. Vyssh. Uchebn. Zaved., Mashinostr., 2005, no. 1, pp. 52–56.
Osipov, A.P., Simulation of Abrasive Surfaces by the Superposition of Relative Supporting Curves, Sprav., Inzh. Zh., 2005, no. 2, pp. 38–45.
Nosenko, V.A., Shlifovanie adgezionno-aktivnykh metallov (Grinding Adhesionally Active Metals), Moscow: Mashinostroenie, 2000.
Maslov, E.N., Teoriya shlifovaniya metallov (Theory of Metal Grinding), Moscow: Mashinostroenie, 1974.
Lopadze, T.P. and Bokuchava, G.V., Iznos almazov i almaznykh krugov (Wear of Diamonds and Diamond Wheels), Moscow: Mashinostroenie, 1967.
Nosenko, V.A. and Sayutin, G.I., Role of the Cooling Properties of the Fluid in Abrasive Wear, Abrazivy, 1975, no. 3, pp. 5–6.
Author information
Authors and Affiliations
Additional information
Original Russian Text © V.A. Nosenko, E.V. Fedotov, A.I. Savin, 2007, published in STIN, 2007, No. 10, pp. 12–18.
About this article
Cite this article
Nosenko, V.A., Fedotov, E.V. & Savin, A.I. Probabilistic model of the grain-tip distribution at the working surface of a grinding wheel. Russ. Engin. Res. 27, 707–712 (2007). https://doi.org/10.3103/S1068798X07100139
Issue Date:
DOI: https://doi.org/10.3103/S1068798X07100139