References
Uprugii tokarnyi resets. Ekspress-informatsiya. Mashinostroit. Prozivodstvo. Ser. Rezhushchii instr. (Elastic Lathe Tool. Express Information. Machine Building. Series: Cutting Tools), Moscow: VINITI, 1990, issue 8, pp. 35–40.
Feodos’yev, V.I., Soprotivlenie materialov (Mechanics of Materials), Moscow: Nauka, 1970.
Suslov, A.G. and Dal’skii, A.M., Nauchnye osnovy tekhnologii mashinostroeniya (Scientific Concepts of Machine-Building Technolog), Moscow: Mashinostroenie, 2002.
Kirillova, A.A., Svirshchev, V.I., and Makarov, V.F., Effect of the Production Machining Conditions on the Quality of Surface in Finish Turning with a Groove Cutter, Mater. 5-i mezhd. nauchno-tekh. konf. “Obespechenie i povyshenie kachestva mashin na etapakh ikz zhiznennogo tsikla” (Proc. of 5th Int. Scient. Eng. Conf. “Quality of Machines on the Stages of their Life Cycle and Its Improvement), Bryansk: Izd. BGTU, 2005, pp. 192–193.
Additional information
Original Russian Text © A.A. Kirillova, V.I. Svirshchev, V.F. Makarov, 2007, published in STIN, 2007, No. 4, pp. 12–14.
About this article
Cite this article
Kirillova, A.A., Svirshchev, V.I. & Makarov, V.F. Influence of grooving cutter stiffness on surface quality in longitudinal turning. Russ. Engin. Res. 27, 464–466 (2007). https://doi.org/10.3103/S1068798X07070131
Issue Date:
DOI: https://doi.org/10.3103/S1068798X07070131