Abstract
The paper considers the application of a new method of forming thick-layer coatings by the electro-spark deposition for restoring worn-out components operating in conditions of sliding friction, based on the example of powered hydraulic cylinders. For practical usage, the technological capabilities of this method were greatly expanded and the dimensional barrier on the deposition of coatings with a high contact continuity was overcome.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Kurbatkin, I.I. and Kudryashov, A.E., Russ. J. Frict. Wear, 2011, vol. 32, no. 6, pp. 437–441.
Shtansky, D.V., Batenina, I.V., Yadroitcev, I.A., Ryashin, N.S., et al., Surf. Coat. Technol., 2012, vol. 208, pp. 14–23.
Verkhoturov, A.D., Podchernyaeva, I.A., Panashenko, V.M., and Konevtsov, L.A., Elektroiskrovoe legirovanie titana i ego splavov metallami i kompozitsionnymi materialami (Electric Sparkle Alloying of Titanium and Its Alloys by Metals and Composites), Burenin, A.A., Ed., Komsomolsk-on-Amur: Inst. Mashinoved. Metall., Dal’nevost. Otd., Ross. Akad. Nauk, 2014.
Verbitchi, V., Ciuca, C., and Cojocaru, R., Nonconv. Technol. Rev., 2011, no. 1, pp. 62–67.
Depczyński, W., and Radek, N., Proc. 22nd Int. Conf. on Metallurgy and Materials “Metal–2013,” May 15–17, 2013, Brno, 2013, pp. 1045–1050.
Korotaev, D.N., Tekhnologicheskie vozmozhnosti formirovaniya iznosostoikikh nanostruktur elektroiskrovym legirovaniem (Technological Possibilities for Development of Wear-Resistant Nanostructures by Electric Sparkle Alloying), Omsk: Sib. Gos. Avtom.-Dorozhn. Akad., 2009.
Khimukhin, S.N., Ri Hosen, Verkhoturov, A.D., and Ri, E.H., Formirovanie struktury sloya na metallakh i splavakh pri elektroiskrovoi obrabotke (Formation of the Layer Structure on Metals and Alloys by Electric Sparkle Treatment), Khabarovsk: Dal’nevost. Gos. Univ. Putei Soobshch., 2010.
Ivanov, V.I., Burumkulov, F.Kh., and Denisov, V.A., Eurasian Patent 017066, Byull. Izobret. EAPV, 2012, no. 9.
Ivanov, V.I., Tr. Vseross. Nauchno-Issled. Tekhnol. Inst. Remonta Eksp. Mashinno-Trakt. Parka, 2013, vol. 113, pp. 429–434.
Ivanov, V.I., Tr. Vseross. Nauchno-Issled. Tekhnol. Inst. Remonta Eksp. Mashinno-Trakt. Parka, 2013, vol. 113, pp. 450–456.
Burumkulov, F.Kh., Lezin, P.P., Senin, P.V., Ivanov, V.I., Velichko, S.A., and Ionov, P.A., Elektroiskrovye tekhnologii vosstanovleniya i uprochneniya detalei mashin i instrumentov (Electrospark Processes of Restoration and Hardening of Machine Parts and Tools), Saransk: Krasnyi Oktyabr’, 2003.
Chumakov, P.V., Reparation technology of power hydrocylinders for agricultural machines by electric sparkle method, Extended Abstract of Cand. Sci. (Tech.) Dissertation, Saransk, 2013.
Burumkulov, F.Kh., Lyalyakin, V.P., Pushkin, I.A., and Frolov, S.N., Mekh. Elektrif. Sel’sk. Khoz., 2001, no. 4, pp. 23–28.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Original Russian Text © S.A. Velichko, P.V. Senin, V.I. Ivanov, A.V. Martynov, P.V. Chumakov, 2017, published in Elektronnaya Obrabotka Materialov, 2017, No. 2, pp. 6–13.
About this article
Cite this article
Velichko, S.A., Senin, P.V., Ivanov, V.I. et al. Formation of thick layer electro-spark coatings for restoring worn-out parts of power hydraulic cylinders. Surf. Engin. Appl.Electrochem. 53, 116–123 (2017). https://doi.org/10.3103/S1068375517020119
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068375517020119