Abstract
The corrosion-protective properties of nanocrystalline TiN coatings (d ∼15–25 nm) with respect to a 12Kh18N10T stainless steel substrate have been studied by the electrochemical method in a 3% NaCl solution. It has been shown that, in the studied thickness range of 1–9 μm, the protective properties of coatings formed by the vacuum-arc method largely depend on the thickness and the factors that affect the level of residual stresses responsible for the presence of defects (porosity) in the coatings. These factors include the deposition rate, the density of the plasma flow onto the substrate, the pulsed negative bias potential amplitude thereon, and reaction-gas pressure.
Similar content being viewed by others
References
Blinkov, I.V., Volkhonskii, O.A., Anikin, V.N., and Konukhov, Yu.V., Nanostructured wear-resistant coatings based on multicomponent nitrides and produced by vacuum-arc ion-plasma deposition, Prot. Met. Phys. Chem. Surf., 2012, vol. 48, no. 6, pp. 649–655.
Pogrebnjak, A.D., Shpak, A.P., Azarenkov, N.A., and Beresnev, V.M., Structures and properties of hard and superhard nanocomposite coatings, Phys. Usp., 2009, vol. 52, no. 1, pp. 29–54.
Reshetnyak, V.N. and Strel’nitskii, V.E., Synthesis of strengthening nanostructured coatings, Vopr. At. Nauki Tekh., 2008, no. 2, pp. 119–130.
Veprek, S. and Veprek-Heijman, M.J.G., Industrial applications of superhard nanocomposite coatings, Surf. Coat. Technol., 2008, vol. 202, pp. 5063–5073.
Pogrebnyak, A.D., Drobyshevskaya, A.A., Il’yashenko, M.V., et al., Tribotechnical and physicomechanical properties and thermal stability of nanoand microcomposite coatings based on Ti–Al–N, Fiz. Inzh. Poverkh., 2010, vol. 8, no. 1, pp. 20–27.
Andrievskii, R.A., The role of nanoscale effects in the interaction between nanostructured materials and environments, Prot. Met. Phys. Chem. Surf., 2013, vol. 49, no. 5, pp. 528–540.
Vasil’ev, V.V. and Strel’nitskii, V.E., RF Patent 2507305, 2014.
Antropov, L.I., Teoreticheskaya elektrokhimiya. Uchebnik dlya studentov khimicheskikh i khimiko-tekhnologicheskikh spetsial’nostei vuzov (Theoretical Electrochemistry: Handbook for University Students Specializing in Chemistry and Chemical Engineering), Moscow: Vysshaya Shkola, 1975, 3rd ed.
Vasil’ev, V.V., Luchaninov, A.A., Reshetnyak, E.N., Tolmacheva, G.N., and Strel’nitskii, V.E., Effect of the pulsed bias potential on the structure and hardness of coatings deposited from filtered vacuum-arc plasma, Sbornik trudov 4-oi mezhdunarodnoi nauchnoi konferentsii po fiziko-khimicheskim osnovam formirovaniya i modifikatsii mikroi nanostruktur FMMN-2010 (Proc. 4th Int. Sci. Conf. on Physicochemical Principles of Formation and Modification of Microand Nanostructures FMMN-2010), Kharkiv, 2010, vol. 1, pp. 85–89.
Akkaya, S.S., Vasyliev, V.V., Reshetnyak, E.N., Kazmanli, K., Solak, N., Strel’nitskij, V.E., and Ürgen, M., Structure and properties of TiN coatings produced with PIII&D technique using high efficiency rectilinear filter cathodic arc plasma, Surf. Coat. Technol., 2013, vol. 236, pp. 332–340.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.V. Vasil’ev, A.A. Luchaninov, E.K. Sevidova, I.I. Stepanova, V.E. Strel’nitskii, 2015, published in Elektronnaya Obrabotka Materialov, 2015, No. 5, pp. 29–34.
About this article
Cite this article
Vasil’ev, V.V., Luchaninov, A.A., Sevidova, E.K. et al. Effect of deposition mode on the corrosion-protective properties of nanocrystalline TiN coatings. Surf. Engin. Appl.Electrochem. 51, 440–445 (2015). https://doi.org/10.3103/S1068375515050154
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068375515050154