Abstract
A mathematical model of the electrodynamic processes in the discharge circuit and the discharge chamber of an electrohydraulic installation as well as the algorithm for solving the resulting system of equations in terms of numerical methods are developed. The discharge channel expansion in water is simulated in a geometrically nonlinear model but on a stationary finite difference grid. Both the mathematical model and algorithm are tested by using the example of a solution of similar problems. The results are compared with experimental data. The influence of the finite diameter of the electrodes on transient processes in the discharge circuit and the dynamics of the discharge channel expansion are analyzed.
Similar content being viewed by others
References
Gulyi, G.A., Nauchnye osnovy razryadno-impul’snykh tekhnologii (Scientific Fundamentals of Discharge Pulse Technologies), Kiev: Naukova dumka, 1990, p. 208.
Golovashchenko, S.F., Bessonov, N.M., and Ilinich, A.M., Two-step method of forming complex shapes from sheet metal, J. Mater. Process. Technol., 2011, vol. 211, pp. 875–885.
Rohatgi, A., Stephens, E.V., Soulami, A., Davies, R.W., and Smith, M.T., Experimental characterization of sheet metal deformation during electro-hydraulic forming, J. Mater. Process. Technol., 2011, vol. 211, pp. 1824–1833.
Rohatgi, A., Stephens, E.V., Soulami, A., Davies, R.W., Smith, M.T., Soulami, A., and Ahzi, S., Electrohydraulic forming of sheet metals: Free-forming vs conicaldie forming, J. Mater. Process. Technol., 2012, vol. 212, pp. 1070–1079.
Krivitskii, E.V. and Shamko, V.V., Perekhodnye protsessy pri vysokovol’tnom razryade v vode (Transient Processes at High-voltage Discharge in Water), Kiev: Naukova dumka, 1979, p. 208.
Kosenkov, V.M., Influence of the channel length of high-voltage discharge in water on the efficiency of the platic deformation of cylindrical shell, Zh. Tekh. Fiz., 2011, vol. 81, no. 10, pp. 133–139.
Dubovenko, K.V., Allowance for the interaction between the underwater electric discharge channel plasma and the shock wave reflected from the chamber’s wall, Surg. Eng. Appl. Electrochem., 2013, vol. 49, no. 1, pp. 28–35.
Blashchenko, A.D., Polovinka, V.D., and Tertilov, R.V., Diatomic generator of pulse currents with controlled circuit enclosure, J. Mater. Process. Technol., 2013, vol. 49, no. 1, pp. 28–35.
Barbashova, G.A. and Ivanov, A.V., Calculation of the two-dimensional nonstationary current of liquid at submersible electrical explosion of a wire of finite length, Hydromech., 1986, vol. 53, pp. 16–19.
Barbashova, G.A., Electric circuit inductance dependence of a hydrodynamic load on a thrown plate during high-speed impact welding of two plates, Surg. Eng. Appl. Electrochem., 2012, vol. 48, no. 3, pp. 260–263.
Barbashova, G.A., Kosenkov, V.M., and Tsurkin, V.N., Influence of hydrostatic pressure on the hydrodynamic processes at electrical discharge, Sb. Nauchn. Tr. (IGTM NAS of Ukraine), 2000, vol. 3, pp. 36–42.
Kosenkov, V.M. and Kamenskaya, L.A., Calculation of the electric discharge channel expansion in liquid described in potential approzimation, Acoust. Bull., 2001, no. 2, pp. 47–53.
Godunov, S.K., Zabrodin, A.V., Ivanov, M.Ya., Kraiko, A.N., and Prokopov, G.P., Chislennoe reshenie mnogomernykh zadach gazovoi dinamiki (Numerical Solution of Multidimensional Problems of Gas Dynamics), Moscow: Nauka, 1976.
Kalitkin, N.N., Chislennye metody (Numerical Methods), Moscow: Nauka, 1978.
Kosenkov, V.M., Bychkov, V.M., Zhekul, V.G., and Poklonov, S.G., Electrical discharges of big length in water and their effect on the energy of the plastic deformation of a cylindrical shell, Surg. Eng. Appl. Electrochem., 2013, vol. 49, no. 3, pp. 241–246.
Kosenkov, V.M., Bychkov, V.M., Zhekul, V.G., and Poklonov, S.G., Experimental investigation of the effect of electrical discharges of big length in water on the energy of the plastic deformation of a cylindrical shell, Zh. Tekh. Fiz. Lett., 2012, vol. 38, no. 9, pp. 103–110.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.M. Kosenkov, V.M. Bychkov, 2015, published in Elektronnaya Obrabotka Materialov, 2015, No. 2, pp. 66–72.
About this article
Cite this article
Kosenkov, V.M., Bychkov, V.M. Mathematical modeling of transient processes in the discharge circuit and chamber of an electrohydraulic installation. Surf. Engin. Appl.Electrochem. 51, 167–173 (2015). https://doi.org/10.3103/S1068375515020076
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068375515020076