Abstract
The results of tests are reported for the adherence strength of coatings manufactured by ESA using rod electrodes and the method of cold gas-dynamic sputtering of powders based on copper, aluminum, and zinc during normal pulling off and shearing.
Similar content being viewed by others
References
MP 250-87. Opredelenie prochnosti stsepleniya gasotermicheskikh pokrytii s osnovnym metallon (Adherence Strength Determination of Gas-Dynamic Coatings with a Base Metal), Mscow: VNIINMASh, 1987.
RD 10.003-2009. Geometricheskie parametry i fizikomekhanicheskie svoistva poverkhnostei, obrazovannykh pri elektroiskrovoi obrabotke materialov v gazovoi srede (Geometric Parameters and Physicomechanical Properties of Surfaces Manufactured during the Electro Spark Processing of Materials in a Gaseous Medium), Moscow: 2009.
Samsonov, G.V., Verkhoturov, A.D., Bovkun, G.A., and Sychev, V.S., Elektroiskrovoe legirovanie metallicheskikh poverkhnostei (Electrospark Alloying of Metal Surfaces), Kiev: Naukova Dumka, 1976.
Vlasov, M.V., Increase of Service life of a Plate Hydro Pump by Reconditioning the Worn Working Surfaces Applying the Method of Electrospark Alloying (using the example of a plate hydro pump 5320 of GU system of KamAZ vehicles), Cand. Sci. (Eng.) Dissertation, Saransk: 2003.
Rakov, N.V., Technologies and Means for Reconditioning the Workpieces of Hydraulic Control Valves with a Slide Valve Using the Method of Electrospark Alloying (using the example of a R12 P Hydraulic Control Valve), Cand. Sci. (Eng.) Dissertation, Saransk: 2003.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © F.Kh. Burumkulov, V.A. Denisov, A.Yu. Kostyukov, V.I. Ivanov, R.N. Zadorozhnii, A.V. Potapov, 2011, published in Elektronnaya Obrabotka Materialov, 2011, No. 2, pp. 24–29.
About this article
Cite this article
Burumkulov, F.K., Denisov, V.A., Kostyukov, A.Y. et al. Adherence strength of electrospark and gas-dynamic coatings. Surf. Engin. Appl.Electrochem. 47, 120–125 (2011). https://doi.org/10.3103/S1068375511020037
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068375511020037