Abstract
The dependence of the mass transfer parameters on the structure of the Ni-Cr-Al and Ni-Cr-NiAl electrode systems in the electrospark alloying of steel 45 is studied. The phase composition of the cast, sintered, and hot-pressed alloys is a mixture of solid solutions based on nickel, chromium, and NiAl intermetallide. The mass-transfer coefficient in the case of alloying with cast and hot-pressed alloys is 2 to 3.5 times higher than that in the event of alloying with sintered alloys. This difference is due to the different structures of the electrodes prepared by different techniques.
Similar content being viewed by others
References
Kragel’skii, I.V., Trenie i iznos (Friction and Wear), Moscow: Mashinostroenie, 1968.
Kindrachuk, M.V., Dushik, Yu.A., and Luchka, M.V., Local Pattern of the Stress-Strain State of a Composite Material Loaded by Friction Forces, Poroshk. Metall., 1994, nos. 9–10, pp. 56–61.
Kindrachuk, M.V., Shurin, A.K., and Panarin, V.E., Wear Resistance of Corrosion-Proof Eutectic Alloys with Interstitial Phases, in Problemy treniya i iznashivaniya (Problems of Friction and Wear), Kiev: Tekhnika, 1981, no. 19, pp. 17–28.
Borisov, Yu.S., Kharlamov, Yu.A., Sidorenko, S.L., and Ardatovskaya, E.N., Gazotermicheskie pokrytiya iz poroshkovykh materialov. Spravochnik (Handbook of Gas-Thermal Coatings of Powdered Materials), Kiev: Naukova Dumka, 1987.
Paustovs’kii, O.V., Tkachenko, Yu.G., Anisimov, G.M., Alfintseva, R.A., Kirilenko, S.M., and Bovkun, G.O., Technology and Materials for Electrospark Hardening and Restoration of Machine Pieces, in Tsil’ova kompleksna programa NAN Ukraini “Problemy resursu i bezpeki ekspluatatsi konstruktsii, sporud ta mashin”. Zb. nauk. statei, (Target Complex Program of the National Academy of Sciences of Ukraine “Problems of Lifetime and Safety of Constructions, Buildings, and Machinery”: Collection of Scientific Papers), Kiev: Inst. Elektrosvarki im. Patona, Nats. Akad. Nauk Ukr., 2006, pp. 553–557.
Paustovs’kii, O.V., Tkachenko, Yu.G., Alfintseva, R.A., Kirilenko, S.M., Yurchenko, D.Z., and Anisimov, G.M., Development and Use of Electrospark Surface Hardening and Restoration of Machine Pieces and Tools, in Tsil’ova kompleksna programa NAN Ukrani “Problemy resursu i bezpeki ekspluatatsi konstruktsii, sporud ta mashin”. Zb. nauk. Statei, (Target Complex Program of the National Academy of Sciences of Ukraine “Problems of Lifetime and Safety of Constructions, Buildings, and Machinery”: Collection of Scientific Papers), Kiev: Inst. Elektrosvarki im. Patona, Nats. Akad. Nauk Ukr., 2009, pp. 589–594.
Lazarenko, B.R. and Lazarenko, N.I., Elektricheskaya eroziya metallov (Electric Erosion of Metals), Moscow: Gostekhizdat, 1946.
Lazarenko, B.R. and Lazarenko, N.I., Elektroiskrovaya obrabotka tokoprovodyashchikh materialov (Electrospark Machining of Conductive Materials), Moscow: Akad. Nauk SSSR, 1959.
Lazarenko, N.I., On the Mechanism of Formation of Coatings by Electrospark Alloying of Metal Surfaces, Elektron. Obrab. Mater., 1965, no. 1, pp. 49–53.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.V. Paustovskii, R.A. Alfintseva, V.E. Shelud’ko, T.V. Kurinnaya, V.S. Tereshchenko, 2011, published in Elektronnaya Obrabotka Materialov, 2011, No. 1, pp. 30–34.
About this article
Cite this article
Paustovskii, A.V., Alfintseva, R.A., Shelud’ko, V.E. et al. A study of the dependence of the mass transfer on the structural factors of the electrodes in electrospark alloying with Ni-Cr-Al alloys. Surf. Engin. Appl.Electrochem. 47, 23–27 (2011). https://doi.org/10.3103/S1068375511010157
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068375511010157