References
Stavitskii, B.I., From the History of the Electric Spark Material Treatment: Why the USSR lost its Leadership in the Spark Technologies, Metalloborab. Mezhd. Inf.-Tekhn. Zh., 2007, no. 4, pp. 52–56.
Electric Spark Treatment of the Metals, in Trudy TsNIL-Elektrom (The Scientific Works of the TsNIL Elektrom), Lazarenko, B.R., Ed., Moscow: AN SSSR, 1957, issue 1.
Electric Spark Treatment of the Metals, in Trudy TsNIL-Elektrom (The Scientific Works of the TsNIL Elektrom), Lazarenko, B.R., Ed., Moscow: AN SSSR, 1960, issue 2.
Problemy elektricheskoi obrabotki materialov (The Problems of the Electric Treatment of the Materials), Lazarenko, B.R., Ed., Moscow: AN USSR, 1960.
The Problems of Electrical Treatment of the Materials, in Trudy TsNIL-Elektrom (The Scientific Works of the TsNIL Elektrom), Lazarenko, B.R., Ed., Moscow: AN SSSR, 1962.
Samsonov, G.V., Mukha, I.M., and Krushinskii, A.N., How to Choose the Electrode Material for the Electric Spark Treatment, Elektron. Obrab. Mater., 1966, no. 1, pp. 28–32.
Plotkin, S.Ya., A Word about Samsonov. Science of Sintering, Beogard, 1978, vol. 10, special issue, pp. 27–42.
Zolotykh, B.N., On the Physical Nature of the Material Treatment by the Electron-Beam, in Trudy TsNIL-Elektrom (The Scientific Works of the TsNIL Elektrom), Lazarenko, B.R., Ed., Moscow: AN SSSR, 1957, pp. 38–69.
Vrkhoturov, A.D., Scientific Foundations of the Doping Layer under the Electric Spark Alloying, Doctoral Sci. (Eng.) Dissertation, Kiev: IPM AN USSR, 1984.
Palatnik, L.S., Nonequilibrium and Quasi-Equilibrium States in the Alloys, Doctoral Sci. (Eng.) Dissertation, Kharkov: Kharkov. gos. Univ., 1952.
Samsonov, G.V., Pryadko, I.F., and Pryadko, L.F., Elektronnaya lokalizatsiya v tverdom tele (Electrons Localization in the Solid), Moscow: Nauka, 1976.
Shmakov, G.S., Conditions for Creating and the Properties of the Refractory and Elecrtoerosion Resistant Cuprum-Based Metal-Ceramic Materials, Cand. Sci. (Eng.) Dissertation, Kiev: IPM AN USSR, 1966.
Samsonov, G.V. and Mukha, I.M., Data Analysis Referred to Material Wear of the Treating Electrodes, Elektron. Obrab. Mater., 1961, no. 3, pp. 3–13.
Samsonov, G.V. and Mukha, I.M., The Laws that Determine Cathode Wear under the Electric Spark Treatment of the Metals, Elektron. Obrab. Mater., 1961, no. 3, pp. 17–24.
Lemeshko, A.M., Electrode Erosion under the Electric Spark Treatment of the Refractory Materials and their Compounds with Carbon, Boron and Nitrogen, Cand. Sci. (Eng.) Dissertation, Kiev: IPM AN USSR, 1971.
Bovkun, G.A., The Abrazive Wear Resistance for the Refractory Compounds, Cand. Sci. (Eng.) Dissertation, Kiev: IPM AN USSR, 1969.
Samsonov, G.V. and Verkhoturov, A.D., The Regularities for Cathode and Anode Wear under Electric Spark Hardening, Elektron. Obrab. Mater., 1969, no. 1, pp. 25–29.
Trefilov, V.I., Mil’man, Yu.V., and Firstov, S.A., Fizicheskie osnovy prochnosti tugoplavkikh metallov (Physical Foundations of the Refractory Materials Strength), Kiev: Naukova dumka, 1975.
Verkhoturov, A.D. and Fadeev, V.S., Nekotorye voprosy sovremennogo sostoyaniya i perspektivy razvitiya materialovedeniya (Some Problems of the Modern State and Trends of Development of the Material Science), Vladivostok: Dal’nauka, 2004.
Mulin, Yu.I., Technological and Methodological Foundations for Forming the Functional Coatings by Means of the Electric Spark Alloying by Using the Electrode Materials Made of the Mineral Concentrate from the Far East, Doctoral Sci. (Eng.) Dissertation, Komsomolsk-on-Amur: KnAGTU, 2007.
Khimukhin, S.N., Scientific Foundations for Forming the Changed Layer on the Metals and Alloys with the Predetermined Properties under the Low-Voltage Electric Spark Treatment, Doctoral Sci. (Eng.) Dissertation, Komsomolsk-on-Amur: KnAGTU, 2009.
Verkhoturov, A.D. and Nikolenko, S.V., Classification, Development and Creation of the Electrode Materials for the Electric Spark Alloying, Uprochn. Tekhnol. Pokryt., 201, no. 2, pp. 13–22.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.D. Verkhoturov, I.A. Podchernyaeva, V.I. Ivanov, L.A. Konevtsov, 2010, published in Elektronnaya Obrabotka Materialov, 2010, No. 5, pp. 145–155.
About this article
Cite this article
Verkhoturov, A.D., Podchernyaeva, I.A., Ivanov, V.I. et al. On the problem of creating a new scientific school in the field of electric erosion machining: Electrode material science. Surf. Engin. Appl.Electrochem. 46, 523–533 (2010). https://doi.org/10.3103/S1068375510050194
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068375510050194