Abstract
The phase composition, the sizes of the grains (crystallites), the microstructure and microhardness, and the physical and mechanical properties of the nanocomposite coatings on the 20H steel surface resulting from the electrical processing in a gas medium by compact electrodes made of steels 65G and Sv08 with regard to the processing velocity and their influence on the wear resistance of the composition have been investigated.
Similar content being viewed by others
References
Burumkulov, Ph.Kh., Lezin, P.P., Senin, P.V., Ivanov. V.I., Velichko, S.A. and Ionov, P.A., Electroiskrovye tekhnologii vosstanovleniya i uprochneniya detalei mashin i instrumentov (teoriya i praktika) (Electrospark Technologies of Reconditioning and Strengthening of Vehicle Pieces and Tools (Theory and Practice), Saransk: Krasnyi Oktyabr’”, 2003.
Mikhailyuk, A.I., Gitlevich, A.I., Rapoport, L.S. et al., The Influence of the Modes of Electrospark Alloying on the Structure and Wear Resistance of Iron, Elektrich. metody obrab. poverkhnosti, 1988, no. 4, pp. 10–13.
Gorelik, S.S., Skakov, Yu.A. and Rastorguev, L.N., Rentgenograficheskii i elektronno-opticheskii analiz (X-Ray and Electron-Optical Analysis), Moscow: Mosk. inst. stali i splavov, 1994.
Gusev, A.I., Nanomaterialy, nanosruktury, nanotekhnologii (Nanomaterials, Nanostructures, Nanotechnologies), Moscow: PHIZMATLIT, 2009, ed. 2.
Burumkulov, Ph.Kh., Okin, M.A. and Ivanov. V.I., The Influence of Physical and Mechanical Properties and the Remaining Tensions of Electrospark Coatings on the Compounds Wear Resistance, Remont, vosstanovlenie, modernizatsiya, 2009, no. 3, pp. 17–23.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © F.Kh. Burumkulov, P.V. Senin, S.A. Velichko, V.I. Ivanov, P.A. Ionov, M.A. Okin, 2009, published in Elektronnaya Obrabotka Materialov, 2009, No. 6, pp.22–29.
About this article
Cite this article
Burumkulov, F.K., Senin, P.V., Velichko, S.A. et al. The properties of nanocomposite coatings formed on a steel 20H surface by means of electrospark processing using rod-shaped electrodes of steels 65 G and Sv 08. Surf. Engin. Appl.Electrochem. 45, 455–460 (2009). https://doi.org/10.3103/S1068375509060039
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068375509060039