Skip to main content
Log in

Automation of Installation of Wires of a High-Voltage Traction AC Power-Supply Line

  • Published:
Russian Electrical Engineering Aims and scope Submit manuscript

Abstract

A model of an automated mobile installation complex for the installation of overhead line wires is presented—an automated complex consisting of a manipulator crane for hanging wires and a torsion machine for turning the overhead line by 60° between supports, which is based on a platform that can easily move along the construction route. The automated complex creates the possibility of continuous and simultaneous installation of all three wires of a six-step transposition of an overhead high-voltage line on each support along its entire length in an automatic mode. This installation technology will significantly reduce the time for construction work, reduce the influence of the human factor, and improve the safety of installation.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1.
Fig. 2.
Fig. 3.
Fig. 4.
Fig. 5.

Similar content being viewed by others

REFERENCES

  1. Bader, M.P., Elektromagnitnaya sovmestimost’ (Electromagnetic Compatibility), Moscow: UMK Minsterstvo Putei Soobshcheniya Ross. Fed., 2002.

  2. Semenova, E.Yu., Iodko, Yu.V., Semenova, D.V., and Kulikov, A.A., Device for mounting the transposition geometry of wires of an air high-voltage power supply line with high symmetry of running electrical parameters of the line, which is in conditions of intense action of the electromagnetic field of the overhead system of railways, electrified on alternating current, RF Patent no. 2701601, Byull. Izobret., 2019, no. 28.

  3. Semenova, E.Yu., Iodko, Yu.V., Karpenko, V.I., and Semenova, D.V., Cross bonding configuration of overhead HV supply line wires with hyper symmetry of linear electric parameters of line operated at intensive interferences of railway ac contact system electromagnetic field, RF Patent no. 2460654, Byull. Izobret., 2012, no. 25.

  4. Mikhailyuk, M.V., Strashnov, E.V., and Loginov, D.M., Modeling of sensors in virtual environment systems, Tr. Nauchn.-Issled. Inst. Sist. Issled. Ross. Akad. Nauk, 2018, vol. 8, no. 2, pp. 70–76. https://doi.org/10.25682/NIISI.2018.2.0009

    Article  Google Scholar 

  5. Tuktarov, M.F., Siraev, Sh.F., and Gazizov, A.R., Application of encoder sensor in control systems of linear electric drive of grain-washing machine, Energetika–agropromyshlennomu kompleksu Rossii. Materialy mezhdunarodnoi nauchno-praktich. konferentsii (Power Engineering to Agricultural Complex of Russia: Proc. Int. Sci.-Pract. Conf.), Chelyabinsk, 2017, Troitsk, Chelyabinsk oblast: Yuzhno-Ural. Gos. Agrarnyi Univ., 2017, pp. 189–195.

  6. Ambrož, M., Raspberry Pi as a low-cost data acquisition system for human powered vehicles, Measurement, 2017, vol. 100, pp. 7–18. doi https://doi.org/10.1016/j.measurement.2016.12.037

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to M. P. Bader.

Ethics declarations

The authors declare that they have no conflicts of interest.

Additional information

Translated by F. Baron

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Bader, M.P., Kulikov, A.A. Automation of Installation of Wires of a High-Voltage Traction AC Power-Supply Line. Russ. Electr. Engin. 93, 551–556 (2022). https://doi.org/10.3103/S1068371222090024

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.3103/S1068371222090024

Keywords:

Navigation