Abstract
An express method of direct measurements of the current density distribution of axially symmetric electron beams is proposed. It is shown that use of the technique is urgently needed to improve the reproducibility of the results of electron-beam processing. Comparative analysis of existing methods to measure the parameters of electron beams used for technological purposes is carried out. A technique to restore a radial distribution of electron beam current density as well as a device to implement the technique is developed. The results of radial distribution recovery are analyzed in the case in which the initial distribution is given in the form of a model function of normal distribution. An algorithm to determine estimated sizes of the area within which spatial distribution discretization is carried out is developed. Based on analysis of the experimental dependences, it is shown that the suggested numerical method can be applied to all types of axial-symmetric distributions. The nature of errors occurring after distribution function recovery is analyzed. A technological projection of express diagnostic systems for the processing electron beams is made taking into account parameters of the existing element base.
Similar content being viewed by others
References
Smalyuk, V.V., Diagnostika puchkov zaryazhennykh chastits v uskoritelyakh (Discharge Particles Beams in Accelerators: Diagnostics), Dikanskii, N.S., Ed., Novosibirsk: Parallel’, 2009.
Zuev, I.V. and Uglov, A.A., The way to measure electron beam diameter by means of rotating probe method, Fiz. Khim. Obrab. Mater., 1967, no. 5.
Rykalin, N.N., Zuev, I.V., and Uglov, A.A., Osnovy elektronno-luchevoi obrabotki materialov (Foundations of Electron-Beam Processing for Materials), Moscow: Mashinostroenie, 1978.
Akop’yants, K.S., Nazarenko, O.K., Gumovskii, V.V., and Chernyakin, V.P., Diagnostic system for electron beam in electron beam welding plants, Avtomat. Svarka, 2002, no. 10.
Meissner, C., Standardizing the art of electron beam welding, Sci. Techn. Rev., 2008, no. 3.
Palmer, T.A. and Elmer, J.W., Characterization of electron beams in multiple welders using the enhanced modified Faraday cup, Proc. Int. Institute of Welding Conf., Quebec City, 2006.
Gershtein, G.M. and Medoks, M.G., USSR Inventor’s Certificate no. 295215, Byull. Izobret., 1971, no. 7.
Goncharov, A.L., Dragunov, V.K., Shcherbakov, A.V., Terent’ev, E.V., Portnov, M.A., and Chulkov, I.S., A technique to determine processing parameters of electron beams in welding electron guns, Russ. Electr. Eng., 2015, vol. 86, no. 10.
Sharafutdinov, A.F., The way to diagnose low energy electron beams according to transient radiation, Cand. Sci. (Phys.-Math.) Dissertation, Tomsk, 2004.
Tereshchenko, S.A., Metody vychislitel’noi tomografii (Calculating Tomography), Moscow: Fizmatlit, 2004.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.V. Shcherbakov, A.L. Goncharov, A.S. Kozhechenko, M.Ya. Pogrebisskii, V.P. Rubtsov, V.K. Dragunov, 2016, published in Elektrotekhnika, 2016, No. 8, pp. 62–67.
About this article
Cite this article
Shcherbakov, A.V., Goncharov, A.L., Kozhechenko, A.S. et al. An express method of measurements of parameters of technological electron beams. Russ. Electr. Engin. 87, 487–492 (2016). https://doi.org/10.3103/S1068371216080071
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068371216080071