Abstract
A method of arc voltage gradient calculation for an electric arc furnace (EAF) is presented. The arc voltage gradient is the basic characteristic in study and simulation of an automatic power control system of an EAF. This characteristic is a strongly nonlinear multifactorial function that depends on electrical parameters of a power supply system, thermal conditions, and processes of arc heat exchange in an EAF melting bath. The method of arc voltage gradient calculation considers the relation between the electric and thermal conditions of an EAF in order to describe feasible nonlinear properties and to improve expressions for voltage and current transfer ratios as nonlinear multifactorial functions in particular. An EAF is regarded as a subject of control. Multifactorial properties are defined by the parameters of an equivalent electrical circuit of a furnace and by variable conditions of arc heat exchange in a melting chamber during steel melting. The method is effective for overcoming the uncertainty of the arc length in simulation of an EAR power controller. The unstable behavior of the furnace at a high impedance was explained using the obtained functions of the arc current and the arc voltage for various electrodes and the arc length. The minimum allowed arc current was found. The automatic power controller becomes unstable and the arc is extinguished under this value.
Similar content being viewed by others
References
Hoke, W., Der Spannungsbedarf des stationaren Hochstromlichtbogens in einem Lichtbogenofen für die Stahlherstellung, Dr. Ing. Dissertation, TU Clausthal, 1980.
Bowman, B. and Kruger, K., Arc Furnace Physics, Dusseldorf: Verlag Stahleisen, 2009.
Krouchinin, A.M. and Sawicki, A., A Theory of Electrical Arc Heating, Publishing Office of TUCz, 2003.
Kruchinin, A.M., Physical foundations of heat exchange model for electric arch in electrical power industry, Sbornik dokladov nauchno-tekhnicheskogo seminara “Elektrotekhnologiya v pervom desyatiletii XXI veka”, posvyashchennogo 100-letiyu profesorra M.Ya. Smelyanskogo (Proc. Sci.-Tech. Seminar “Electrical Engineering in the First Decade of 21st Century” Dedicated to 100th Anniversary of Professor M.Ya. Smelyanskii), Moscow: MPEI, 2013, pp. 55–77.
Kruchinin, A.M., Arch heat exchange model for DC arch furnace. Part 1, Elektrometallurgiya, 2012, no. 3, pp. 38–40.
Kruchinin, A.M., Arch heat exchange model for DC arch furnace. Part 2, Elektrometallurgiya, 2012, no. 4, pp. 39–48.
Kruchinin, A.M., Arch heat exchange model for DC arch furnace. Part 3, Elektrometallurgiya, 2012, no. 5, pp. 35–42.
Kruchinin, A.M., Osnovy proektirovaniya elektricheskikh i teplovykh rezhimov elektronagreva v dugovykh pechakh: Uchebn. posobie (Design Foundations for Electrical and Heat Modes of Electric Heating in Arch Furnaces. Student’s Book), Moscow: MPEI, 2014.
Kruchinin, A.M., Arc in a gas flow as an object controlling of closed automated system, Doklady nauchnotekhnich. konf. po itogam nauchno-issledovatel’skii rabot za 1964-65 gg. (Proc. Sci.-Tech. Conf. Resuming Scientific Research Works for 1964-1965), Moscow: MPEI, 1965, pp. 75–95.
Runstadler, P.W., Laminar and turbulent flow of an argon arc plasma, Harvard Univ. Eng. Sci. Lab. Techn. Rep., 1965, no. 22.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.M. Kruchinin, 2016, published in Elektrotekhnika, 2016, No. 3, pp. 44–50.
About this article
Cite this article
Kruchinin, A.M. Nonlinear properties of voltage and current transfer ratios for electric arc furnaces. Russ. Electr. Engin. 87, 160–165 (2016). https://doi.org/10.3103/S1068371216030068
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068371216030068