Skip to main content
Log in

Simulating the operation of auxiliary machines of a 2(3)ES5K locomotive

  • Published:
Russian Electrical Engineering Aims and scope Submit manuscript

Abstract

Auxiliary machines of electric trains provide the operation of traction motors and electrical and pneumatic equipment. The main condition of safe operation of the asynchronous electric drive of auxiliary machines is the maintenance of the operation mode of the electric drive in terms of the basic technical data, according to which NVA-55 electric drives are matched by nominal operation (long-term) mode S1. The effect of supply voltage on the operation of locomotive auxiliary machines is considered. Auxiliary machines are used under poor conditions on alternating current electric trains. Disbalance of the motor currents occurs even at nominal voltage of the overhead contact system and operable phase-shifting device. In operation, the voltage on the contact wire line is not constant and the equipment modes can be inconsistent with the nominal one, which leads to a significant number of failures of auxiliary equipment. This makes it necessary for the microprocessor control system to use the controlled auxiliary electric drive. An individual autonomous inverter with fully balanced sinusoidal output voltage allows one to increase the reliability of the induction motor drive, while the proportional control of the blower motor reduces the power consumption.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. Astashkov, N.P., The way to increase stability of induction machines on the base of microprocessor control systems for electric drive, Cand. Sci. (Techn.) Dissertation, Irkutsk, 2014.

    Google Scholar 

  2. Fedyukov, Yu.A., Marchenko, E.A., and Foshkina, S.V., Razrabotka sistemy zashchity vspomogatel’nykh mashin (Ways for Developing Protection System for Additional Machines), Khabarovsk, 2012.

    Google Scholar 

  3. Dyadichko, V.Ya., Elektrovoz magistral’nyi 2ES5K (3ES5K) (Mainline Electric Locomotive 2ES5K (3ES5K)), book 1: Opisanie i rabota, elektricheskie skhemy (Description and Operation. Electrical Circuits), Novocherkassk: All-Russian Scientific and Research, Planning and Design Technological Institute on Electric Locomotives Building, 2006.

    Google Scholar 

  4. Gavrilov, I.B., Elektrovoz magistral’nyi 2ES5K (3ES5K) (Mainline Electric Locomotive 2ES5K (3ES5K)), book 3: Opisanie i rabota, elektricheskie mashiny (Description and Operation. Electrical Machines), Novocherkassk: All-Russian Scientific and Research, Planning and Design Technological Institute on Electric Locomotives Building, 2004.

    Google Scholar 

  5. Fedyukov, Yu.A., Marchenko, E.A., and Foshkina, S.V., Operation modes and diagnostics for AC locomotive’s additional machines, Lokomotiv, 2011, no. 7.

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to A. V. Gulyaev.

Additional information

Original Russian Text © A.V. Gulyaev, E.E. Ten, D.S. Fokin, S.A. Shukharev, 2016, published in Elektrotekhnika, 2016, No. 2, pp. 38–41.

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Gulyaev, A.V., Ten, E.E., Fokin, D.S. et al. Simulating the operation of auxiliary machines of a 2(3)ES5K locomotive. Russ. Electr. Engin. 87, 93–96 (2016). https://doi.org/10.3103/S1068371216020073

Download citation

  • Received:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.3103/S1068371216020073

Keywords

Navigation