Abstract
In the article, the structure of a bench for testing the friction characteristics of a friction pair of centrifugal brake rollers has been considered. The dependences of the coefficient of friction and wear on the temperature of the materials of the friction pair, viz., a brake insert manufactured by Huzhou Jiutong Logistics Machinery Co., Ltd (China) and a domestic friction pair of the 6KV-10 rolled brake band of the EM-2 grade over St.3 steel grade (A537Gr.58), were obtained for temperature ranges that do not exceed 100°C. It has been shown that the rubber–PA6 friction pair widely used in brake rollers of foreign manufacture cannot be employed at high values of the slip velocity and the normal force applied to the friction lining, as it results in rapid heating to the critical temperature and, as a consequence, intensive wear. The domestic 6KV-10 brake band of the EM-2 grade, along with a metallic roller shell is proposed as the material of the friction pair. The frictional material proposed for the friction lining has a high coefficient of friction and a high wear resistance in a wide range of operating temperatures, normal forces, and temperatures of the frictional contact.
Similar content being viewed by others
References
Ivanovskii, K.E., Rakovshchik, A.N., and Tsoglin, A.N., Rolikovye i diskovye konveiery i ustroistva (Roller and Disk Conveyors and Devices), Moscow: Mashinostroenie, 1973.
Nosko, A.L. and Safronov, E.V., Determination of maximum permissible motion rate of the pallet on gravitational roller conveyor, Izv. Vyssh. Uchebn. Zaved., Mashinostr., 2017, no. 8, pp. 32–40.
GOST (State Standard) 15960–96: Friction Flexible Asbestos Materials and Products of Them. Specifications, Moscow: Izd. Standartov, 2003.
GOST (State Standard) 8732–78: Seamless Hot-Deformed Steel Pipes. Range of Sizes, Moscow: Izd. Standartov, 2004.
Spravochnik po tribotekhnike. Tom 3. Tribotekhnika antifrictsionnykh, friktsionnykh i stsepnykh ustroistv. Metody i sredstva tribotekhnicheskikh ispytanii (Handbook on Tribotechnics, Vol. 3: Tribotechnics of Antifriction, Friction, and Coupling Devices. Methods and Tools of Tribotechnical Tests), Khebda, M. and Chichinadze, A.V., Eds., Moscow: Mashinostroenie, 1992.
Gerashchenko, O.A., Gordov, A.N., Eremina, A.K., et al., Temperaturnye izmereniya. Spravochnik (Temperature Measurement: Handbook), Gerashchenko, O.A., Ed., Kiev: Naukova Dumka, 1989.
Nosko, A.L., Evaluation of the service life of the friction lining of the brake of load-lifting machines, Trudy Vaserossiiskoi nauchno-tekhnicheskoi konferentsii s uchastiem inostrannykh spetsialistov “Tribologiya-mashinostroeniyu” (Proc. All-Russ. Sci.-Tech. Conf. with Int. Participation “Achievements of Tribology for Machine Engineering”), Moscow, 2014, p.61.
Nosko, A.L., Evaluation of the loading of friction units of the breaks of hoist-transport machines, Izv. Tul’sk. Gos. Univ., Ser. Pod’emno-Transp. Mash. Oborud., 2006, no. 7, pp. 146–160.
Bilik, Sh.M., Pary treniya metall-plastmassa v mashinakh i mekhanizmakh (Metal-Plastic Friction Pairs in Machines and Mechanisms), Moscow: Mashinostroenie, 1966.
Buckley, D., Surface Effects in Adhesion, Friction, Wear, and Lubrication, Amsterdam: Elsevier, 1981.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.L. Nosko, E.V. Safronov, V.A. Soloviev, 2018, published in Trenie i Iznos, 2018, Vol. 39, No. 2, pp. 184–191.
About this article
Cite this article
Nosko, A.L., Safronov, E.V. & Soloviev, V.A. Study of Friction and Wear Characteristics of the Friction Pair of Centrifugal Brake Rollers. J. Frict. Wear 39, 145–151 (2018). https://doi.org/10.3103/S1068366618020125
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068366618020125